RPM to Radians Per SecondRPM to rad/s

RPM to Radians Per Second Converter (RPM to rad/s)

1 RPM = 2π/60 = π/30 ≈ 0.10472 rad/s. To convert RPM to rad/s, multiply by 0.10472 (π/30); to convert rad/s to RPM, multiply by 9.5493 (30/π).

Convert RPM to radians per second (rad/s) and back with the exact π/30 factor. Get rad/s, degrees per second, frequency in Hz, rotation period and surface speed (v = ω·r) instantly.

Last updated:

m

How to Convert RPM to Radians Per Second

Complete dimensional derivation and multi-step conversion method

Step 1 · Unit Setup
ω = RPM × (π / 30) rad/s

Choose the rotational speed unit you want to convert from:

Visual Rotation Simulation (Proportional Speed)
3,000RPM
Angular:314.16 rad/s
Rotational:50.0 Hz
  1. 1
    Unit Setup

    Select Your Input Unit (RPM, rad/s, Hz, or °/s)

    Choose your starting unit: Revolutions Per Minute (RPM), Radians Per Second (rad/s), Frequency in Hertz (Hz, rev/s), or Degrees Per Second (°/s). The converter dynamically adapts in real time.

    ● Showing in the simulator
  2. 2
    Parameters

    Input Rotational Velocity & Optional Radius

    Enter your numeric speed value or pick a machinery benchmark. If you are analyzing a rotating rotor, shaft, pulley, wheel, or centrifuge, specify the radius in meters to instantly calculate linear tangential surface speed (m/s, km/h, mph).

    Click to simulate
  3. 3
    Analysis

    Inspect Complete Analytical Kinematics Breakdown

    Review instant results across all rotational metrics: exact rad/s, RPM, cycle period per revolution, rotational frequency, and peripheral linear speed.

    Click to simulate

How to Convert RPM to Rad/s & Rad/s to RPM (Formula & Derivation)

Quick Answer: To convert RPM (revolutions per minute) to rad/s (radians per second), multiply by π and divide by 30 (or multiply by approximately 0.1047197551):

ω = RPM × (π / 30) rad/s

To convert radians per second (rad/s) back to RPM, multiply by 30 and divide by π (or multiply by approximately 9.5492965855):

RPM = ω × (30 / π)

Mathematical Derivation From First Principles

  1. One complete revolution equals 360 degrees, which is exactly 2π radians (~6.2831853 rad).
  2. One minute equals exactly 60 seconds.
  3. Multiplying RPM by 2π radians per revolution and dividing by 60 seconds per minute gives: ω = RPM × (2π / 60) rad/s.
  4. Simplifying 2π/60 by dividing numerator and denominator by 2 yields the exact analytical conversion factor: ω = RPM × (π / 30) rad/s.

Notations, Common Synonyms & Unit Variations

Rotational velocity is expressed across literature in multiple equivalent notations:

  • Revolutions per minute: RPM, rev/min, rev per min, rev min, or r/min.
  • Radians per second: rad/s, rad/sec, rad sec, rads, or rad per second.

All of these notations describe the same quantities, so the same π/30 factor applies to each.

Practical Engineering Guidance

Avoid using rounded decimals like 0.10472 in multi-stage engineering code. In gear trains, electric motor torque estimations (P = τ·ω), and torsional vibration models, using truncated constants causes cumulative floating-point error. Retaining the symbolic fraction π/30 guarantees exact scientific precision.

RPM to radians per second rotational velocity formula and geometry diagram
RPM to rad/s:
  ω (rad/s) = RPM × 2π ÷ 60
            = RPM × π/30 ≈ RPM × 0.1047197551

rad/s to RPM:
  RPM       = ω × 60 ÷ 2π
            = ω × 30/π ≈ ω × 9.5492965855

Related Rotational Relationships:
  Frequency f (Hz)            = RPM ÷ 60 = ω ÷ 2π
  Degrees per Second (°/s)    = rad/s × 180/π = RPM × 6
  Period T (s/rev)            = 60 ÷ RPM = 2π ÷ ω
  Tangential Velocity v (m/s) = ω × r = (RPM × π ÷ 30) × r
Example

Worked Step-by-Step Examples

Example 1: Convert 1,800 RPM (standard 4-pole synchronous motor) to rad/s

ω = 1,800 × π / 30 = 60π ≈ 188.49556 rad/s.
Frequency: f = 1,800 / 60 = 30 Hz.

Period: T = 60 / 1,800 ≈ 0.0333 seconds per rev.

Example 2: Convert 100 rad/s to RPM

RPM = 100 × 30 / π = 3,000 / π ≈ 954.93 RPM.

Example 3: Tangential linear speed of a 0.25 m radius flywheel at 3,000 RPM

ω = 3,000 × π / 30 = 100π ≈ 314.159 rad/s.
v = ω × r = 314.159 rad/s × 0.25 m = 78.54 m/s (282.74 km/h or 175.69 mph).

Another way to find ω

Angular Velocity from Angle and Time (ω = Δθ / t)

Know how far something turned and how long it took? Divide the angle by the time to get ω in rad/s, RPM, Hz and °/s. New to the topic? Read what angular velocity is.

Angular velocity ω
1.5708rad/s
RPM15
Hertz (rev/s)0.25 Hz
Degrees / second90 °/s
Formula: ω = Δθ / t (Δθ in rad, t in s); RPM = ω × 30/π. A negative angle means reverse rotation.

Common RPM to rad/s Conversion Examples

Exact analytical results across mechanical engineering, electric motors, and physics benchmarks.
Engineering ScenarioCalculationKinematic Result
Automotive Engine — 3,000 RPM → rad/s3,000 × π/30314.159265 rad/s · 50 Hz · 18,000 °/s · 0.02 s/rev
2-Pole Motor (60 Hz) — 3,600 RPM → rad/s3,600 × π/30 = 120π376.991118 rad/s · 60 Hz · 21,600 °/s · 0.0167 s/rev
AC Induction Motor — 1,800 RPM → rad/s1,800 × π/30 = 60π188.495559 rad/s · 30 Hz · 10,800 °/s · 0.0333 s/rev
Industrial Motor — 1,500 RPM → rad/s1,500 × π/30 = 50π157.079633 rad/s · 25 Hz · 9,000 °/s · 0.04 s/rev
Enterprise Hard Drive — 7,200 RPM → rad/s + Hz7,200 × π/30 = 240π753.982237 rad/s · 120 Hz · 43,200 °/s · 0.00833 s/rev
Angle Grinder — 11,000 RPM → rad/s11,000 × π/301,151.917306 rad/s · 183.33 Hz · 66,000 °/s
Reverse Conversion — 100 rad/s → RPM100 × 30/π954.929659 RPM · 15.915 Hz · 5,729.578 °/s

RPM to Radian/Second Conversion Reference Table

Calculated with exact analytical rad/s = RPM × π/30. Radians per second rounded to five decimal places; frequency in Hertz (Hz); angular displacement in degrees per second (°/s); period in seconds per revolution (s/rev). Common low speeds plus standard industrial motor speeds; every value from 1 to 100 RPM is on the full conversions page.
RPMrad/sHz°/sPeriod (s)
10.104720.0167660
20.209440.03331230
30.314160.051820
40.418880.06672415
50.523600.08333012
60.628320.13610
70.733040.1167428.5714
80.837760.1333487.5
90.942480.15546.6667
101.047200.1667606
121.256640.2725
151.570800.25904
202.094400.33331203
252.617990.41671502.4
303.141590.51802
333.455750.551981.8182
454.712390.752701.3333
505.235990.83333001.2
606.2831913601
757.853981.254500.8
909.424781.55400.6667
10010.471981.66676000.6
12012.5663727200.5
18018.8495631,0800.3333
20020.943953.33331,2000.3
30031.4159351,8000.2
50052.359888.33333,0000.12
60062.83185103,6000.1
75078.5398212.54,5000.08
90094.24778155,4000.0667
1,000104.7197616.66676,0000.06
1,200125.66371207,2000.05
1,450151.8436424.16678,7000.0414
1,500157.07963259,0000.04
1,750183.2595729.166710,5000.0343
1,800188.495563010,8000.0333
2,400251.327414014,4000.025
2,850298.4513047.517,1000.0211
3,000314.159275018,0000.02
3,450361.2831657.520,7000.0174
3,600376.991126021,6000.0167
5,000523.5987883.333330,0000.012
5,400565.486689032,4000.0111
7,200753.9822412043,2000.0083
10,0001047.19755166.666760,0000.006
15,0001570.7963325090,0000.004
20,0002094.39510333.3333120,0000.003
Browse All 223 RPM & rad/s Conversions & Worked Guides →

Real-World Angular Velocities (RPM, rad/s and Rim Speed)

How fast common machines actually turn, in rad/s, with the surface speed at their edge. ω is exact (RPM × π/30); rim speed is v = ω × r for the radius shown.

Speeds are typical rated or nominal values; rim speed uses the stated radius. Download the full table as CSV for spreadsheets or coursework.
ObjectRPMrad/sHzRim speed (m/s)Basis
Earth (one sidereal day)0.0006960.00007290.0000116465.1equatorial radius 6,378 km
Wind turbine rotor (5 MW class)12.11.2670.201779.828126 m rotor, rated speed
Vinyl LP33.3333.4910.55560.53212-inch record edge
Ceiling fan (high)20020.9443.33313.82352-inch blade tip
Bicycle wheel at 25 km/h19820.733.2996.944700×25c tyre
Car wheel at 100 km/h842.188.18314.03527.778205/55 R16 tyre
Car engine at idle80083.77613.333—typical petrol engine
Washing machine spin1,400146.623.33335.186drum radius 24 cm
4-pole motor, 50 Hz (synchronous)1,500157.125—120 × f ÷ poles
4-pole motor, 60 Hz (synchronous)1,800188.530—120 × f ÷ poles
2-pole motor, 50 Hz (synchronous)3,000314.250—120 × f ÷ poles
2-pole motor, 60 Hz (synchronous)3,60037760—120 × f ÷ poles
Laptop hard drive5,400565.59018.3782.5-inch platter edge
Desktop hard drive7,20075412035.8143.5-inch platter edge
Angle grinder11,0001,152183.371.995125 mm disc rim
Microcentrifuge (max)15,0001,571250131.28.35 cm rotor radius
Dental air turbine400,00041,8886,66733.511.6 mm bur

Download CSV (real-world speeds + 1–10,000 RPM chart)

Key Rotational Kinematics Facts & Constants

  • The exact analytical conversion factor is π/30 rad/s per RPM (approx. 0.1047197551). Retaining π/30 avoids rounding error accumulation in multi-step physics modeling.
  • The exact reciprocal multiplier is 30/π RPM per rad/s (approx. 9.5492965855). Multiply any rad/s speed by 30/π to obtain exact RPM.
  • 1 Hertz (Hz) is 1 complete cycle per second, which equals 60 RPM and exactly 2π rad/s (~6.283185 rad/s).
  • A standard 4-pole AC induction motor on a 60 Hz grid has a synchronous speed of 1,800 RPM (60π rad/s ≈ 188.496 rad/s), slipping to ~1,750 RPM under mechanical load.
  • A 2-pole AC induction motor on a 60 Hz grid runs at 3,600 RPM synchronous speed (120π rad/s ≈ 376.991 rad/s).
  • An engine redlining at 8,000 RPM spins at 837.76 rad/s, sweeping through 48,000 degrees per second.
  • High-performance enterprise hard drive platters at 7,200 RPM rotate at 120 Hz and 753.98 rad/s.
  • Dental air-turbine drills rotate between 350,000 and 450,000 RPM, reaching angular velocities over 41,888 rad/s.
  • Centrifuges spinning at 100,000 RPM reach 10,472 rad/s and generate accelerations exceeding 800,000 × g.
  • Linear tangential velocity at a radius r is v = ω·r. Doubling shaft radius or rotational speed doubles peripheral velocity.
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Sources & References

  1. SI Brochure: The International System of Units (9th Edition)Bureau International des Poids et Mesures (BIPM)
  2. NIST Guide to the SI, Chapter 4: Two Classes of SI Units and the RadianNational Institute of Standards and Technology (NIST)
  3. IEEE Standard 754-2019 for Floating-Point ArithmeticIEEE Standards Association
  4. ISO 80000-3: Quantities and Units — Space and TimeInternational Organization for Standardization (ISO)

From the blog

View all →

Frequently asked questions

Engineering tools

Next step after RPM ↔ rad/s: free calculators for the jobs that come right after it.