3 RPM to Radians Per Second Converter
Instant conversion for 3 RPM to rad/s (0.314159 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 0.31415927
- Degrees per Second (°/s)
- 18 °/s
- Hertz (Hz)
- 0.05 Hz
- Revolutions per Second (RPS)
- 0.05 rev/s
- Revolutions per Hour (RPH)
- 180 rev/hr
- Revolutions per Day
- 4,320 rev/day
- Radians per Minute (rad/min)
- 18.849556 rad/min
- Milliradians per Second (mrad/s)
- 314.15927 mrad/s
- Period (seconds per rev)
- 20 s/rev
- Exact Formula
- 3 × π/30 = 0.31415927 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 3 × (π / 30) = 0.314159 rad/s
Exact fraction: 3π/30 rad/s · Reciprocal: 0.3142 rad/s × (30/π) = 3 RPM
Reverse Conversion: 0.3142 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
3 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
3 RPM = π/10 rad/s ≈ 0.314159 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 0.3141 rad/s instead of the exact 0.3142 rad/s — an error of 0.00005927 rad/s.
What this speed looks like in practice
At 3 RPM a shaft turns about 3× as fast as a clock's second hand. A utility-scale wind turbine rotor turns about 5× faster.
Revolutions over time
That is 180 revolutions per hour and 4,320 per day. A quarter turn (90°) takes 5 s, and the shaft sweeps 0.018° every millisecond.
Rim speed and centripetal load at ω = 0.3142 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.003142 m/s · 0.01131 km/h | 0.000987 m/s² · 0.0001006 g |
| 5 cm | 10 cm | 0.01571 m/s · 0.05655 km/h | 0.004935 m/s² · 0.0005032 g |
| 10 cm | 20 cm | 0.03142 m/s · 0.1131 km/h | 0.00987 m/s² · 0.001006 g |
| 25 cm | 50 cm | 0.07854 m/s · 0.2827 km/h | 0.02467 m/s² · 0.002516 g |
| 50 cm | 1 m | 0.1571 m/s · 0.5655 km/h | 0.04935 m/s² · 0.005032 g |
| 1 m | 2 m | 0.3142 m/s · 1.131 km/h | 0.0987 m/s² · 0.01006 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 3 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.05 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.1 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.15 Hz | Below typical VFD range — use a gearbox |
| 8 | 0.2 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1 RPM · 0.1047 rad/s | ×3 |
| 5:1 | 0.6 RPM · 0.06283 rad/s | ×5 |
| 10:1 | 0.3 RPM · 0.03142 rad/s | ×10 |
| 30:1 | 0.1 RPM · 0.01047 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.00004935 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.0004935 J |
| 0.1 kg·m² (car flywheel) | 0.004935 J |
| 1 kg·m² (industrial flywheel) | 0.04935 J |
Multiples of this speed
- 0.5× = 1.5 RPM0.1571 rad/s
- 2× = 6 RPM0.6283 rad/s
- 5× = 15 RPM1.5708 rad/s
- 10× = 30 RPM3.1416 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3 RPM to radians per second, multiply 3 by π and divide by 30: 3 × (π / 30) = 0.314159 rad/s (approx. 0.3142 rad/s).
3 RPM equals 0.0500 Hz (revolutions per second), calculated by dividing 3 by 60 seconds.
To convert 0.3142 rad/s back to RPM, multiply by 30 and divide by π: 0.3142 × (30 / π) ≈ 3 RPM.
At 3 RPM, one full 360° revolution takes 20 seconds (20000.00 ms).
A 4-pole induction motor has a synchronous speed of 3 RPM at 0.1 Hz (f = RPM × poles / 120 = 3 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 0.314159 rad/s × 0.1 m = 0.0314 m/s (0.1131 km/h). The centripetal acceleration at the rim is ω²·r = 0.0099 m/s².