3,600 RPM to Radians Per Second Converter
Instant conversion for 3,600 RPM to rad/s (376.991118 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 376.99112
- Degrees per Second (°/s)
- 21,600 °/s
- Hertz (Hz)
- 60 Hz
- Revolutions per Second (RPS)
- 60 rev/s
- Revolutions per Hour (RPH)
- 216,000 rev/hr
- Revolutions per Day
- 5,184,000 rev/day
- Radians per Minute (rad/min)
- 22,619.467 rad/min
- Milliradians per Second (mrad/s)
- 376,991.12 mrad/s
- Period (seconds per rev)
- 0.016667 s/rev
- Exact Formula
- 3600 × π/30 = 376.99112 rad/s
- Nearest Real-World Example
- Car engine — highway (2,500 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3,600 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 3600 × (π / 30) = 376.991118 rad/s
Exact fraction: 3600π/30 rad/s · Reciprocal: 376.99 rad/s × (30/π) = 3,600 RPM
Reverse Conversion: 376.99 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
3,600 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
3,600 RPM = 120π rad/s ≈ 376.991118 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 376.92 rad/s instead of the exact 376.9911 rad/s — an error of 0.07112 rad/s.
What this speed looks like in practice
At 3,600 RPM a shaft turns about 2× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.5× faster.
Revolutions over time
That is 216,000 revolutions per hour and 5,184,000 per day. A quarter turn (90°) takes 4.17 ms, and the shaft sweeps 21.6° every millisecond.
Rim speed and centripetal load at ω = 376.9911 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 3.77 m/s · 13.57 km/h | 1,421 m/s² · 144.9 g |
| 5 cm | 10 cm | 18.85 m/s · 67.86 km/h | 7,106 m/s² · 724.6 g |
| 10 cm | 20 cm | 37.7 m/s · 135.7 km/h | 14,210 m/s² · 1,449 g |
| 25 cm | 50 cm | 94.25 m/s · 339.3 km/h | 35,530 m/s² · 3,623 g |
| 50 cm | 1 m | 188.5 m/s · 678.6 km/h | 71,060 m/s² · 7,246 g |
| 1 m | 2 m | 377 m/s · 1,357 km/h | 142,100 m/s² · 14,490 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 3,600 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 60 Hz | Standard speed on a 60 Hz grid |
| 4 | 120 Hz | Reachable with a VFD |
| 6 | 180 Hz | Above typical VFD range |
| 8 | 240 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,200 RPM · 125.7 rad/s | ×3 |
| 5:1 | 720 RPM · 75.4 rad/s | ×5 |
| 10:1 | 360 RPM · 37.7 rad/s | ×10 |
| 30:1 | 120 RPM · 12.57 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 71.06 J |
| 0.01 kg·m² (bench-grinder wheel) | 710.6 J |
| 0.1 kg·m² (car flywheel) | 7.106 kJ |
| 1 kg·m² (industrial flywheel) | 71.06 kJ |
Multiples of this speed
- 0.5× = 1,800 RPM188.4956 rad/s
- 2× = 7,200 RPM753.9822 rad/s
- 5× = 18,000 RPM1,884.9556 rad/s
- 10× = 36,000 RPM3,769.9112 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3,600 RPM to radians per second, multiply 3600 by π and divide by 30: 3600 × (π / 30) = 376.991118 rad/s (approx. 376.99 rad/s).
3,600 RPM equals 60.0000 Hz (revolutions per second), calculated by dividing 3600 by 60 seconds.
To convert 376.99 rad/s back to RPM, multiply by 30 and divide by π: 376.99 × (30 / π) ≈ 3,600 RPM.
At 3,600 RPM, one full 360° revolution takes 0.0167 seconds (16.67 ms).
A 4-pole induction motor has a synchronous speed of 3,600 RPM at 120 Hz (f = RPM × poles / 120 = 3600 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 376.991118 rad/s × 0.1 m = 37.6991 m/s (135.7168 km/h). The centripetal acceleration at the rim is ω²·r = 14212.2303 m/s².