900 RPM to Radians Per Second Converter
Instant conversion for 900 RPM to rad/s (94.247780 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 94.24778
- Degrees per Second (°/s)
- 5,400 °/s
- Hertz (Hz)
- 15 Hz
- Revolutions per Second (RPS)
- 15 rev/s
- Revolutions per Hour (RPH)
- 54,000 rev/hr
- Revolutions per Day
- 1,296,000 rev/day
- Radians per Minute (rad/min)
- 5,654.8668 rad/min
- Milliradians per Second (mrad/s)
- 94,247.78 mrad/s
- Period (seconds per rev)
- 0.066667 s/rev
- Exact Formula
- 900 × π/30 = 94.24778 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 900 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 900 × (π / 30) = 94.247780 rad/s
Exact fraction: 900π/30 rad/s · Reciprocal: 94.248 rad/s × (30/π) = 900 RPM
Reverse Conversion: 94.248 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
900 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
900 RPM = 30π rad/s ≈ 94.24778 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 94.23 rad/s instead of the exact 94.2478 rad/s — an error of 0.01778 rad/s.
What this speed looks like in practice
At 900 RPM a shaft turns about 1.2× as fast as a car engine at idle. A washing machine spin cycle turns about 1.33× faster.
Revolutions over time
That is 54,000 revolutions per hour and 1,296,000 per day. A quarter turn (90°) takes 16.7 ms, and the shaft sweeps 5.4° every millisecond.
Rim speed and centripetal load at ω = 94.2478 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.9425 m/s · 3.393 km/h | 88.83 m/s² · 9.058 g |
| 5 cm | 10 cm | 4.712 m/s · 16.96 km/h | 444.1 m/s² · 45.29 g |
| 10 cm | 20 cm | 9.425 m/s · 33.93 km/h | 888.3 m/s² · 90.58 g |
| 25 cm | 50 cm | 23.56 m/s · 84.82 km/h | 2,221 m/s² · 226.4 g |
| 50 cm | 1 m | 47.12 m/s · 169.6 km/h | 4,441 m/s² · 452.9 g |
| 1 m | 2 m | 94.25 m/s · 339.3 km/h | 8,883 m/s² · 905.8 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 900 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 15 Hz | Reachable with a VFD |
| 4 | 30 Hz | Reachable with a VFD |
| 6 | 45 Hz | Reachable with a VFD |
| 8 | 60 Hz | Standard speed on a 60 Hz grid |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 300 RPM · 31.42 rad/s | ×3 |
| 5:1 | 180 RPM · 18.85 rad/s | ×5 |
| 10:1 | 90 RPM · 9.425 rad/s | ×10 |
| 30:1 | 30 RPM · 3.142 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 4.441 J |
| 0.01 kg·m² (bench-grinder wheel) | 44.41 J |
| 0.1 kg·m² (car flywheel) | 444.1 J |
| 1 kg·m² (industrial flywheel) | 4.441 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 900 RPM to radians per second, multiply 900 by π and divide by 30: 900 × (π / 30) = 94.247780 rad/s (approx. 94.248 rad/s).
900 RPM equals 15.0000 Hz (revolutions per second), calculated by dividing 900 by 60 seconds.
To convert 94.248 rad/s back to RPM, multiply by 30 and divide by π: 94.248 × (30 / π) ≈ 900 RPM.
At 900 RPM, one full 360° revolution takes 0.0667 seconds (66.67 ms).
A 4-pole induction motor has a synchronous speed of 900 RPM at 30 Hz (f = RPM × poles / 120 = 900 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 94.247780 rad/s × 0.1 m = 9.4248 m/s (33.9292 km/h). The centripetal acceleration at the rim is ω²·r = 888.2644 m/s².