1,500 RPM to Radians Per Second Converter
Instant conversion for 1,500 RPM to rad/s (157.079633 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 157.07963
- Degrees per Second (°/s)
- 9,000 °/s
- Hertz (Hz)
- 25 Hz
- Revolutions per Second (RPS)
- 25 rev/s
- Revolutions per Hour (RPH)
- 90,000 rev/hr
- Revolutions per Day
- 2,160,000 rev/day
- Radians per Minute (rad/min)
- 9,424.778 rad/min
- Milliradians per Second (mrad/s)
- 157,079.63 mrad/s
- Period (seconds per rev)
- 0.04 s/rev
- Exact Formula
- 1500 × π/30 = 157.07963 rad/s
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,500 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1500 × (π / 30) = 157.079633 rad/s
Exact fraction: 1500π/30 rad/s · Reciprocal: 157.08 rad/s × (30/π) = 1,500 RPM
Reverse Conversion: 157.08 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,500 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,500 RPM = 50π rad/s ≈ 157.079633 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 157.05 rad/s instead of the exact 157.0796 rad/s — an error of 0.02963 rad/s.
What this speed looks like in practice
At 1,500 RPM a shaft turns about 1.25× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.2× faster.
Revolutions over time
That is 90,000 revolutions per hour and 2,160,000 per day. A quarter turn (90°) takes 10 ms, and the shaft sweeps 9° every millisecond.
Rim speed and centripetal load at ω = 157.0796 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.571 m/s · 5.655 km/h | 246.7 m/s² · 25.16 g |
| 5 cm | 10 cm | 7.854 m/s · 28.27 km/h | 1,234 m/s² · 125.8 g |
| 10 cm | 20 cm | 15.71 m/s · 56.55 km/h | 2,467 m/s² · 251.6 g |
| 25 cm | 50 cm | 39.27 m/s · 141.4 km/h | 6,169 m/s² · 629 g |
| 50 cm | 1 m | 78.54 m/s · 282.7 km/h | 12,340 m/s² · 1,258 g |
| 1 m | 2 m | 157.1 m/s · 565.5 km/h | 24,670 m/s² · 2,516 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 25 Hz | Reachable with a VFD |
| 4 | 50 Hz | Standard speed on a 50 Hz grid |
| 6 | 75 Hz | Reachable with a VFD |
| 8 | 100 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 500 RPM · 52.36 rad/s | ×3 |
| 5:1 | 300 RPM · 31.42 rad/s | ×5 |
| 10:1 | 150 RPM · 15.71 rad/s | ×10 |
| 30:1 | 50 RPM · 5.236 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 12.34 J |
| 0.01 kg·m² (bench-grinder wheel) | 123.4 J |
| 0.1 kg·m² (car flywheel) | 1.234 kJ |
| 1 kg·m² (industrial flywheel) | 12.34 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,500 RPM to radians per second, multiply 1500 by π and divide by 30: 1500 × (π / 30) = 157.079633 rad/s (approx. 157.08 rad/s).
1,500 RPM equals 25.0000 Hz (revolutions per second), calculated by dividing 1500 by 60 seconds.
To convert 157.08 rad/s back to RPM, multiply by 30 and divide by π: 157.08 × (30 / π) ≈ 1,500 RPM.
At 1,500 RPM, one full 360° revolution takes 0.04 seconds (40.00 ms).
A 4-pole induction motor has a synchronous speed of 1,500 RPM at 50 Hz (f = RPM × poles / 120 = 1500 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 157.079633 rad/s × 0.1 m = 15.708 m/s (56.5487 km/h). The centripetal acceleration at the rim is ω²·r = 2467.4011 m/s².