RPM to Radians Per SecondRPM to rad/s

15,000 RPM to Radians Per Second Converter

Instant conversion for 15,000 RPM to rad/s (1570.796327 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result1570.796327 rad/s
Radians per Second (rad/s)
1570.7963
Degrees per Second (°/s)
90,000 °/s
Hertz (Hz)
250 Hz
Revolutions per Second (RPS)
250 rev/s
Revolutions per Hour (RPH)
900,000 rev/hr
Revolutions per Day
21,600,000 rev/day
Radians per Minute (rad/min)
94,247.78 rad/min
Milliradians per Second (mrad/s)
1,570,796.3 mrad/s
Period (seconds per rev)
0.004 s/rev
Exact Formula
15000 × π/30 = 1570.7963 rad/s
Nearest Real-World Example
Jet engine — cruise (15,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1,570.796327 rad/s
Rounded (0.10472):1,570.800000 rad/s
Angular Error / Hour:757.65° / hr

Worked Conversion: 15,000 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 15000 × (π / 30) = 1570.796327 rad/s

Exact fraction: 15000π/30 rad/s · Reciprocal: 1570.8 rad/s × (30/π) = 15,000 RPM

Angular Velocity
1570.796327 rad/s
Frequency
250 Hz
Degrees / Second
90,000 °/s
Period per Rev
0.004 s
Engineering Context: 15,000 RPM reaches turbomachinery and high-speed spindle territory, where every calculation runs in rad/s because the maths of stress and gyroscopic load demands SI units.

Reverse Conversion: 1570.8 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

15,000 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

15,000 RPM = 500π rad/s ≈ 1,570.796327 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 1,570.5 rad/s instead of the exact 1,570.7963 rad/s — an error of 0.2963 rad/s.

What this speed looks like in practice

At 15,000 RPM a shaft turns about 1.36× as fast as a 115 mm angle grinder. A rotary multi-tool at full speed turns about 2.33× faster.

Revolutions over time

That is 900,000 revolutions per hour and 21,600,000 per day. A quarter turn (90°) takes 1 ms, and the shaft sweeps 90° every millisecond.

Rim speed and centripetal load at ω = 1,570.7963 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm15.71 m/s · 56.55 km/h24,670 m/s² · 2,516 g
5 cm10 cm78.54 m/s · 282.7 km/h123,400 m/s² · 12,580 g
10 cm20 cm157.1 m/s · 565.5 km/h246,700 m/s² · 25,160 g
25 cm50 cm392.7 m/s · 1,414 km/h616,900 m/s² · 62,900 g
50 cm1 m785.4 m/s · 2,827 km/h1,234,000 m/s² · 125,800 g
1 m2 m1,571 m/s · 5,655 km/h2,467,000 m/s² · 251,600 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 15,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
2250 HzAbove typical VFD range
4500 HzAbove typical VFD range
6750 HzAbove typical VFD range
81,000 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:15,000 RPM · 523.6 rad/s×3
5:13,000 RPM · 314.2 rad/s×5
10:11,500 RPM · 157.1 rad/s×10
30:1500 RPM · 52.36 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)1.234 kJ
0.01 kg·m² (bench-grinder wheel)12.34 kJ
0.1 kg·m² (car flywheel)123.4 kJ
1 kg·m² (industrial flywheel)1.234 MJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions