Linear ↔ Angular Velocity Calculator
Convert a rotation speed and a radius (or diameter) into the speed of a point on the rim, or work back from a required surface speed to RPM. Built on v = ω × r, with every common length and speed unit.
Rotational ↔ linear speed
Pick a direction and whether you know the radius or the diameter.
Show the working
r = 0.1016 mω = n × π/30 = 1,450 × π/30 = 151.844 rad/sv = ω × r = 151.844 × 0.1016 = 15.4273 m/sa_c = ω² × r = 2,342.54 m/s²
Linear and angular velocity formulas
An object rotating at ω radians per second moves each point on it through an arc of length r × ω every second, because a radian is defined as the angle whose arc equals the radius. So the tangential (linear) speed is simply:
v = ω × rω = RPM × π / 30v = π × D × RPM / 60RPM = 60 × v / (π × D)a_c = ω² × r = v² / rThe last line is the centripetal acceleration that a point on the rim feels, which sets the stress in rotors and the g-force in centrifuges (see centrifuge RPM to RCF).
The only real trap is units. ω must be in rad/s, r in metres, and v comes out in m/s. If you start from RPM, convert with π/30 first. The RPM to rad/s converter shows that step on its own.
Worked examples
- Grinding wheel surface speed. Ø 200 mm at 3600 RPM: v = π × 0.2 × 3600 / 60 = 37.7 m/s. Most vitrified wheels are rated for 35–50 m/s, so check the label.
- Car speed from wheel RPM. Tyre Ø 0.70 m at 800 RPM: v = π × 0.7 × 800 / 60 = 29.3 m/s = 105.6 km/h (65.6 mph).
- Conveyor drum speed for a belt speed. You need 1.2 m/s from a Ø 0.5 m drum: RPM = 60 × 1.2 / (π × 0.5) = 45.8 RPM. A 1450 RPM motor then needs about a 31.6:1 gear reduction.
- Fan tip speed. A blade of radius 0.6 m at 1200 RPM: ω = 125.7 rad/s, v = 75.4 m/s, and the tip sees 9475 m/s², nearly 970 g.
Rim speed table
| Diameter | 100 RPM | 500 RPM | 1000 RPM | 1500 RPM | 3000 RPM |
|---|---|---|---|---|---|
| 50 mm | 0.262 | 1.31 | 2.62 | 3.93 | 7.85 |
| 100 mm | 0.524 | 2.62 | 5.24 | 7.85 | 15.7 |
| 200 mm | 1.05 | 5.24 | 10.5 | 15.7 | 31.4 |
| 300 mm | 1.57 | 7.85 | 15.7 | 23.6 | 47.1 |
| 500 mm | 2.62 | 13.1 | 26.2 | 39.3 | 78.5 |
| 1 m | 5.24 | 26.2 | 52.4 | 78.5 | 157 |
Where engineers use v = ωr
- Belt and conveyor drives: belt speed equals the pulley's pitch-line speed. See pulley RPM to belt speed.
- Machining: cutting speed (SFM or m/min) is v at the cutter. The SFM to RPM calculator does this in shop units.
- Vehicles: road speed from wheel or axle RPM, and back again for gearing.
- Rotor safety: grinding wheels, saw blades, flywheels and fans all have maximum rim speeds.
- Propellers and turbines: tip speed against the speed of sound (see propeller tip speed).
Common mistakes
- Using diameter in v = ωr. The formula needs the radius. Using the diameter doubles the answer.
- Leaving r in millimetres. 100 mm must be 0.1 m. Leaving it as 100 inflates v by 1000×.
- Multiplying RPM by r directly. RPM × r has units of length per minute per radian; you must apply π/30 (to rad/s) first.
- Forgetting tyre deformation. A loaded tyre's rolling radius is a few percent smaller than its free radius.
Frequently asked questions
How do you convert RPM to linear velocity?
Multiply RPM by π/30 to get rad/s, then multiply by the radius in metres. Or use v = π × D × RPM / 60 with the diameter in metres. 1000 RPM on a 0.1 m diameter gives 5.24 m/s.
How do you convert linear speed to RPM?
RPM = 60 × v ÷ (π × D), with v in m/s and D in metres. 10 m/s on a 0.25 m wheel is 764 RPM.
What is the difference between linear and angular velocity?
Angular velocity (rad/s or RPM) is how fast something turns and is the same everywhere on a rigid body. Linear velocity (m/s) is how fast a particular point moves and grows with distance from the axis.
Why does v = ωr need radians?
A radian is the angle whose arc length equals the radius, so arc length = r × angle only when the angle is in radians. In degrees you would need an extra π/180.
How do I find the speed of a wheel in km/h from RPM?
km/h = π × D (m) × RPM × 60 / 1000. A 0.65 m wheel at 600 RPM: π × 0.65 × 600 × 0.06 = 73.5 km/h.
Terms used on this page
- Linear (tangential) velocity
- Speed of a point along its circular path, v = ωr, in m/s.
- Angular velocity (ω)
- Rate of rotation in rad/s; RPM × π/30.
- Radius (r)
- Distance from the axis of rotation to the point of interest; half the diameter.
- Centripetal acceleration
- Inward acceleration of a rotating point, ω²r, in m/s².
- Rim / tip speed
- Linear speed at the outermost radius of a wheel, blade or rotor.
Related calculators
- Torque, Power & RPM CalculatorSolve P = τ·ω for power, torque or speed in kW, hp, N·m and lb·ft.
- Gear Ratio & Pulley RPM CalculatorOutput RPM, torque and direction for gear trains and belt drives.
- SFM to RPM CalculatorSpindle RPM from cutting speed and diameter, plus feed rate.
- RPM to Hz CalculatorRPM, Hz, rad/s, °/s and period in one live converter.
- RPM ↔ rad/s converterω = n × π/30
- Motor slip calculatornₛ = 120·f / P