RPM to Radians Per SecondRPM to rad/s

1,200 RPM to Radians Per Second Converter

Instant conversion for 1,200 RPM to rad/s (125.663706 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result125.663706 rad/s
Radians per Second (rad/s)
125.66371
Degrees per Second (°/s)
7,200 °/s
Hertz (Hz)
20 Hz
Revolutions per Second (RPS)
20 rev/s
Revolutions per Hour (RPH)
72,000 rev/hr
Revolutions per Day
1,728,000 rev/day
Radians per Minute (rad/min)
7,539.8224 rad/min
Milliradians per Second (mrad/s)
125,663.71 mrad/s
Period (seconds per rev)
0.05 s/rev
Exact Formula
1200 × π/30 = 125.66371 rad/s
Nearest Real-World Example
Washing machine spin (1,200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):125.663706 rad/s
Rounded (0.10472):125.664000 rad/s
Angular Error / Hour:60.61° / hr

Worked Conversion: 1,200 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 1200 × (π / 30) = 125.663706 rad/s

Exact fraction: 1200π/30 rad/s · Reciprocal: 125.66 rad/s × (30/π) = 1,200 RPM

Angular Velocity
125.663706 rad/s
Frequency
20 Hz
Degrees / Second
7,200 °/s
Period per Rev
0.05 s
Engineering Context: 1,200 RPM is a common front-loader spin speed, where the angular velocity feeds straight into the centrifugal-force calculation that wrings water out of the load.

Reverse Conversion: 125.66 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

1,200 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,200 RPM = 40π rad/s ≈ 125.663706 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 125.64 rad/s instead of the exact 125.6637 rad/s — an error of 0.02371 rad/s.

What this speed looks like in practice

That is the typical speed of a washing machine spin cycle. At 1,200 RPM a shaft turns about 1.6× as fast as a car engine at idle. A 4-pole motor on a 60 Hz grid turns about 1.5× faster.

Revolutions over time

That is 72,000 revolutions per hour and 1,728,000 per day. A quarter turn (90°) takes 12.5 ms, and the shaft sweeps 7.2° every millisecond.

Rim speed and centripetal load at ω = 125.6637 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.257 m/s · 4.524 km/h157.9 m/s² · 16.1 g
5 cm10 cm6.283 m/s · 22.62 km/h789.6 m/s² · 80.51 g
10 cm20 cm12.57 m/s · 45.24 km/h1,579 m/s² · 161 g
25 cm50 cm31.42 m/s · 113.1 km/h3,948 m/s² · 402.6 g
50 cm1 m62.83 m/s · 226.2 km/h7,896 m/s² · 805.1 g
1 m2 m125.7 m/s · 452.4 km/h15,790 m/s² · 1,610 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,200 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
220 HzReachable with a VFD
440 HzReachable with a VFD
660 HzStandard speed on a 60 Hz grid
880 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1400 RPM · 41.89 rad/s×3
5:1240 RPM · 25.13 rad/s×5
10:1120 RPM · 12.57 rad/s×10
30:140 RPM · 4.189 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)7.896 J
0.01 kg·m² (bench-grinder wheel)78.96 J
0.1 kg·m² (car flywheel)789.6 J
1 kg·m² (industrial flywheel)7.896 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions