RPM to Radians Per SecondRPM to rad/s

7,200 RPM to Radians Per Second Converter

Instant conversion for 7,200 RPM to rad/s (753.982237 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result753.982237 rad/s
Radians per Second (rad/s)
753.98224
Degrees per Second (°/s)
43,200 °/s
Hertz (Hz)
120 Hz
Revolutions per Second (RPS)
120 rev/s
Revolutions per Hour (RPH)
432,000 rev/hr
Revolutions per Day
10,368,000 rev/day
Radians per Minute (rad/min)
45,238.934 rad/min
Milliradians per Second (mrad/s)
753,982.24 mrad/s
Period (seconds per rev)
0.008333 s/rev
Exact Formula
7200 × π/30 = 753.98224 rad/s
Nearest Real-World Example
Hard drive — high perf (7,200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):753.982237 rad/s
Rounded (0.10472):753.984000 rad/s
Angular Error / Hour:363.67° / hr

Worked Conversion: 7,200 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 7200 × (π / 30) = 753.982237 rad/s

Exact fraction: 7200π/30 rad/s · Reciprocal: 753.98 rad/s × (30/π) = 7,200 RPM

Angular Velocity
753.982237 rad/s
Frequency
120 Hz
Degrees / Second
43,200 °/s
Period per Rev
0.0083 s
Engineering Context: 7,200 RPM is the desktop hard-disk spindle standard; converting it to rad/s is the first step in any platter stress or bearing-load calculation.

Reverse Conversion: 753.98 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

7,200 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

7,200 RPM = 240π rad/s ≈ 753.982237 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 753.84 rad/s instead of the exact 753.9822 rad/s — an error of 0.1422 rad/s.

What this speed looks like in practice

That is the typical speed of a desktop hard drive (7,200 RPM). At 7,200 RPM a shaft turns about 1.33× as fast as a laptop hard drive (5,400 RPM). A 115 mm angle grinder turns about 1.53× faster.

Revolutions over time

That is 432,000 revolutions per hour and 10,368,000 per day. A quarter turn (90°) takes 2.08 ms, and the shaft sweeps 43.2° every millisecond.

Rim speed and centripetal load at ω = 753.9822 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm7.54 m/s · 27.14 km/h5,685 m/s² · 579.7 g
5 cm10 cm37.7 m/s · 135.7 km/h28,420 m/s² · 2,898 g
10 cm20 cm75.4 m/s · 271.4 km/h56,850 m/s² · 5,797 g
25 cm50 cm188.5 m/s · 678.6 km/h142,100 m/s² · 14,490 g
50 cm1 m377 m/s · 1,357 km/h284,200 m/s² · 28,980 g
1 m2 m754 m/s · 2,714 km/h568,500 m/s² · 57,970 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 7,200 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
2120 HzReachable with a VFD
4240 HzAbove typical VFD range
6360 HzAbove typical VFD range
8480 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:12,400 RPM · 251.3 rad/s×3
5:11,440 RPM · 150.8 rad/s×5
10:1720 RPM · 75.4 rad/s×10
30:1240 RPM · 25.13 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)284.2 J
0.01 kg·m² (bench-grinder wheel)2.842 kJ
0.1 kg·m² (car flywheel)28.42 kJ
1 kg·m² (industrial flywheel)284.2 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions