1,750 RPM to Radians Per Second Converter
Instant conversion for 1,750 RPM to rad/s (183.259571 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 183.25957
- Degrees per Second (°/s)
- 10,500 °/s
- Hertz (Hz)
- 29.166667 Hz
- Revolutions per Second (RPS)
- 29.166667 rev/s
- Revolutions per Hour (RPH)
- 105,000 rev/hr
- Revolutions per Day
- 2,520,000 rev/day
- Radians per Minute (rad/min)
- 10,995.574 rad/min
- Milliradians per Second (mrad/s)
- 183,259.57 mrad/s
- Period (seconds per rev)
- 0.034286 s/rev
- Exact Formula
- 1750 × π/30 = 183.25957 rad/s
- Nearest Real-World Example
- Power drill (2,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,750 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1750 × (π / 30) = 183.259571 rad/s
Exact fraction: 1750π/30 rad/s · Reciprocal: 183.26 rad/s × (30/π) = 1,750 RPM
Reverse Conversion: 183.26 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,750 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,750 RPM = 175π/3 rad/s ≈ 183.259571 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 183.225 rad/s instead of the exact 183.2596 rad/s — an error of 0.03457 rad/s.
What this speed looks like in practice
At 1,750 RPM a shaft turns about 1.46× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.03× faster.
Revolutions over time
That is 105,000 revolutions per hour and 2,520,000 per day. A quarter turn (90°) takes 8.57 ms, and the shaft sweeps 10.5° every millisecond.
Rim speed and centripetal load at ω = 183.2596 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.833 m/s · 6.597 km/h | 335.8 m/s² · 34.25 g |
| 5 cm | 10 cm | 9.163 m/s · 32.99 km/h | 1,679 m/s² · 171.2 g |
| 10 cm | 20 cm | 18.33 m/s · 65.97 km/h | 3,358 m/s² · 342.5 g |
| 25 cm | 50 cm | 45.81 m/s · 164.9 km/h | 8,396 m/s² · 856.2 g |
| 50 cm | 1 m | 91.63 m/s · 329.9 km/h | 16,790 m/s² · 1,712 g |
| 1 m | 2 m | 183.3 m/s · 659.7 km/h | 33,580 m/s² · 3,425 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,750 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 29.17 Hz | Reachable with a VFD |
| 4 | 58.33 Hz | Reachable with a VFD |
| 6 | 87.5 Hz | Reachable with a VFD |
| 8 | 116.7 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 583.3 RPM · 61.09 rad/s | ×3 |
| 5:1 | 350 RPM · 36.65 rad/s | ×5 |
| 10:1 | 175 RPM · 18.33 rad/s | ×10 |
| 30:1 | 58.33 RPM · 6.109 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 16.79 J |
| 0.01 kg·m² (bench-grinder wheel) | 167.9 J |
| 0.1 kg·m² (car flywheel) | 1.679 kJ |
| 1 kg·m² (industrial flywheel) | 16.79 kJ |
Multiples of this speed
- 0.5× = 875 RPM91.6298 rad/s
- 2× = 3,500 RPM366.5191 rad/s
- 5× = 8,750 RPM916.2979 rad/s
- 10× = 17,500 RPM1,832.5957 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,750 RPM to radians per second, multiply 1750 by π and divide by 30: 1750 × (π / 30) = 183.259571 rad/s (approx. 183.26 rad/s).
1,750 RPM equals 29.1667 Hz (revolutions per second), calculated by dividing 1750 by 60 seconds.
To convert 183.26 rad/s back to RPM, multiply by 30 and divide by π: 183.26 × (30 / π) ≈ 1,750 RPM.
At 1,750 RPM, one full 360° revolution takes 0.0343 seconds (34.29 ms).
A 4-pole induction motor has a synchronous speed of 1,750 RPM at 58.3333 Hz (f = RPM × poles / 120 = 1750 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 183.259571 rad/s × 0.1 m = 18.326 m/s (65.9734 km/h). The centripetal acceleration at the rim is ω²·r = 3358.4071 m/s².