RPM to Radians Per SecondRPM to rad/s

500 RPM to Radians Per Second Converter

Instant conversion for 500 RPM to rad/s (52.359878 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result52.359878 rad/s
Radians per Second (rad/s)
52.359878
Degrees per Second (°/s)
3,000 °/s
Hertz (Hz)
8.333333 Hz
Revolutions per Second (RPS)
8.333333 rev/s
Revolutions per Hour (RPH)
30,000 rev/hr
Revolutions per Day
720,000 rev/day
Radians per Minute (rad/min)
3,141.5927 rad/min
Milliradians per Second (mrad/s)
52,359.878 mrad/s
Period (seconds per rev)
0.12 s/rev
Exact Formula
500 × π/30 = 52.359878 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):52.359878 rad/s
Rounded (0.10472):52.360000 rad/s
Angular Error / Hour:25.26° / hr

Worked Conversion: 500 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 500 × (π / 30) = 52.359878 rad/s

Exact fraction: 500π/30 rad/s · Reciprocal: 52.36 rad/s × (30/π) = 500 RPM

Angular Velocity
52.359878 rad/s
Frequency
8.3333 Hz
Degrees / Second
3,000 °/s
Period per Rev
0.12 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 52.36 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

500 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

500 RPM = 50π/3 rad/s ≈ 52.359878 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 52.35 rad/s instead of the exact 52.3599 rad/s — an error of 0.009878 rad/s.

What this speed looks like in practice

At 500 RPM a shaft turns about 2.5× as fast as a ceiling fan on high. A car engine at idle turns about 1.5× faster.

Revolutions over time

That is 30,000 revolutions per hour and 720,000 per day. A quarter turn (90°) takes 30 ms, and the shaft sweeps 3° every millisecond.

Rim speed and centripetal load at ω = 52.3599 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.5236 m/s · 1.885 km/h27.42 m/s² · 2.796 g
5 cm10 cm2.618 m/s · 9.425 km/h137.1 m/s² · 13.98 g
10 cm20 cm5.236 m/s · 18.85 km/h274.2 m/s² · 27.96 g
25 cm50 cm13.09 m/s · 47.12 km/h685.4 m/s² · 69.89 g
50 cm1 m26.18 m/s · 94.25 km/h1,371 m/s² · 139.8 g
1 m2 m52.36 m/s · 188.5 km/h2,742 m/s² · 279.6 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
28.333 HzReachable with a VFD
416.67 HzReachable with a VFD
625 HzReachable with a VFD
833.33 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1166.7 RPM · 17.45 rad/s×3
5:1100 RPM · 10.47 rad/s×5
10:150 RPM · 5.236 rad/s×10
30:116.67 RPM · 1.745 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)1.371 J
0.01 kg·m² (bench-grinder wheel)13.71 J
0.1 kg·m² (car flywheel)137.1 J
1 kg·m² (industrial flywheel)1.371 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions