1,450 RPM to Radians Per Second Converter
Instant conversion for 1,450 RPM to rad/s (151.843645 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 151.84364
- Degrees per Second (°/s)
- 8,700 °/s
- Hertz (Hz)
- 24.166667 Hz
- Revolutions per Second (RPS)
- 24.166667 rev/s
- Revolutions per Hour (RPH)
- 87,000 rev/hr
- Revolutions per Day
- 2,088,000 rev/day
- Radians per Minute (rad/min)
- 9,110.6187 rad/min
- Milliradians per Second (mrad/s)
- 151,843.64 mrad/s
- Period (seconds per rev)
- 0.041379 s/rev
- Exact Formula
- 1450 × π/30 = 151.84364 rad/s
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,450 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1450 × (π / 30) = 151.843645 rad/s
Exact fraction: 1450π/30 rad/s · Reciprocal: 151.84 rad/s × (30/π) = 1,450 RPM
Reverse Conversion: 151.84 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,450 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,450 RPM = 145π/3 rad/s ≈ 151.843645 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 151.815 rad/s instead of the exact 151.8436 rad/s — an error of 0.02864 rad/s.
What this speed looks like in practice
At 1,450 RPM a shaft turns about 1.21× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.24× faster.
Revolutions over time
That is 87,000 revolutions per hour and 2,088,000 per day. A quarter turn (90°) takes 10.3 ms, and the shaft sweeps 8.7° every millisecond.
Rim speed and centripetal load at ω = 151.8436 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.518 m/s · 5.466 km/h | 230.6 m/s² · 23.51 g |
| 5 cm | 10 cm | 7.592 m/s · 27.33 km/h | 1,153 m/s² · 117.6 g |
| 10 cm | 20 cm | 15.18 m/s · 54.66 km/h | 2,306 m/s² · 235.1 g |
| 25 cm | 50 cm | 37.96 m/s · 136.7 km/h | 5,764 m/s² · 587.8 g |
| 50 cm | 1 m | 75.92 m/s · 273.3 km/h | 11,530 m/s² · 1,176 g |
| 1 m | 2 m | 151.8 m/s · 546.6 km/h | 23,060 m/s² · 2,351 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,450 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 24.17 Hz | Reachable with a VFD |
| 4 | 48.33 Hz | Reachable with a VFD |
| 6 | 72.5 Hz | Reachable with a VFD |
| 8 | 96.67 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 483.3 RPM · 50.61 rad/s | ×3 |
| 5:1 | 290 RPM · 30.37 rad/s | ×5 |
| 10:1 | 145 RPM · 15.18 rad/s | ×10 |
| 30:1 | 48.33 RPM · 5.061 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 11.53 J |
| 0.01 kg·m² (bench-grinder wheel) | 115.3 J |
| 0.1 kg·m² (car flywheel) | 1.153 kJ |
| 1 kg·m² (industrial flywheel) | 11.53 kJ |
Multiples of this speed
- 0.5× = 725 RPM75.9218 rad/s
- 2× = 2,900 RPM303.6873 rad/s
- 5× = 7,250 RPM759.2182 rad/s
- 10× = 14,500 RPM1,518.4364 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,450 RPM to radians per second, multiply 1450 by π and divide by 30: 1450 × (π / 30) = 151.843645 rad/s (approx. 151.84 rad/s).
1,450 RPM equals 24.1667 Hz (revolutions per second), calculated by dividing 1450 by 60 seconds.
To convert 151.84 rad/s back to RPM, multiply by 30 and divide by π: 151.84 × (30 / π) ≈ 1,450 RPM.
At 1,450 RPM, one full 360° revolution takes 0.0414 seconds (41.38 ms).
A 4-pole induction motor has a synchronous speed of 1,450 RPM at 48.3333 Hz (f = RPM × poles / 120 = 1450 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 151.843645 rad/s × 0.1 m = 15.1844 m/s (54.6637 km/h). The centripetal acceleration at the rim is ω²·r = 2305.6493 m/s².