20,000 RPM to Radians Per Second Converter
Instant conversion for 20,000 RPM to rad/s (2094.395102 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 2094.3951
- Degrees per Second (°/s)
- 120,000 °/s
- Hertz (Hz)
- 333.33333 Hz
- Revolutions per Second (RPS)
- 333.33333 rev/s
- Revolutions per Hour (RPH)
- 1,200,000 rev/hr
- Revolutions per Day
- 28,800,000 rev/day
- Radians per Minute (rad/min)
- 125,663.71 rad/min
- Milliradians per Second (mrad/s)
- 2,094,395.1 mrad/s
- Period (seconds per rev)
- 0.003 s/rev
- Exact Formula
- 20000 × π/30 = 2094.3951 rad/s
- Nearest Real-World Example
- Jet engine — cruise (15,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 20,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 20000 × (π / 30) = 2094.395102 rad/s
Exact fraction: 20000π/30 rad/s · Reciprocal: 2094.4 rad/s × (30/π) = 20,000 RPM
Reverse Conversion: 2094.4 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
20,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
20,000 RPM = 2,000π/3 rad/s ≈ 2,094.395102 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 2,094 rad/s instead of the exact 2,094.3951 rad/s — an error of 0.3951 rad/s.
What this speed looks like in practice
At 20,000 RPM a shaft turns about 1.82× as fast as a 115 mm angle grinder. A rotary multi-tool at full speed turns about 1.75× faster.
Revolutions over time
That is 1,200,000 revolutions per hour and 28,800,000 per day. A quarter turn (90°) takes 750 µs, and the shaft sweeps 120° every millisecond.
Rim speed and centripetal load at ω = 2,094.3951 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 20.94 m/s · 75.4 km/h | 43,860 m/s² · 4,473 g |
| 5 cm | 10 cm | 104.7 m/s · 377 km/h | 219,300 m/s² · 22,360 g |
| 10 cm | 20 cm | 209.4 m/s · 754 km/h | 438,600 m/s² · 44,730 g |
| 25 cm | 50 cm | 523.6 m/s · 1,885 km/h | 1,097,000 m/s² · 111,800 g |
| 50 cm | 1 m | 1,047 m/s · 3,770 km/h | 2,193,000 m/s² · 223,600 g |
| 1 m | 2 m | 2,094 m/s · 7,540 km/h | 4,386,000 m/s² · 447,300 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 20,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 333.3 Hz | Above typical VFD range |
| 4 | 666.7 Hz | Above typical VFD range |
| 6 | 1,000 Hz | Above typical VFD range |
| 8 | 1,333 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 6,667 RPM · 698.1 rad/s | ×3 |
| 5:1 | 4,000 RPM · 418.9 rad/s | ×5 |
| 10:1 | 2,000 RPM · 209.4 rad/s | ×10 |
| 30:1 | 666.7 RPM · 69.81 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 2.193 kJ |
| 0.01 kg·m² (bench-grinder wheel) | 21.93 kJ |
| 0.1 kg·m² (car flywheel) | 219.3 kJ |
| 1 kg·m² (industrial flywheel) | 2.193 MJ |
Multiples of this speed
- 0.5× = 10,000 RPM1,047.1976 rad/s
- 2× = 40,000 RPM4,188.7902 rad/s
- 5× = 100,000 RPM10,471.9755 rad/s
- 10× = 200,000 RPM20,943.951 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 20,000 RPM to radians per second, multiply 20000 by π and divide by 30: 20000 × (π / 30) = 2094.395102 rad/s (approx. 2094.4 rad/s).
20,000 RPM equals 333.3333 Hz (revolutions per second), calculated by dividing 20000 by 60 seconds.
To convert 2094.4 rad/s back to RPM, multiply by 30 and divide by π: 2094.4 × (30 / π) ≈ 20,000 RPM.
At 20,000 RPM, one full 360° revolution takes 0.003 seconds (3.00 ms).
A 4-pole induction motor has a synchronous speed of 20,000 RPM at 666.6667 Hz (f = RPM × poles / 120 = 20000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 2094.395102 rad/s × 0.1 m = 209.4395 m/s (753.9822 km/h). The centripetal acceleration at the rim is ω²·r = 438649.0845 m/s².