RPM to Radians Per SecondRPM to rad/s

750 RPM to Radians Per Second Converter

Instant conversion for 750 RPM to rad/s (78.539816 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result78.539816 rad/s
Radians per Second (rad/s)
78.539816
Degrees per Second (°/s)
4,500 °/s
Hertz (Hz)
12.5 Hz
Revolutions per Second (RPS)
12.5 rev/s
Revolutions per Hour (RPH)
45,000 rev/hr
Revolutions per Day
1,080,000 rev/day
Radians per Minute (rad/min)
4,712.389 rad/min
Milliradians per Second (mrad/s)
78,539.816 mrad/s
Period (seconds per rev)
0.08 s/rev
Exact Formula
750 × π/30 = 78.539816 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):78.539816 rad/s
Rounded (0.10472):78.540000 rad/s
Angular Error / Hour:37.88° / hr

Worked Conversion: 750 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 750 × (π / 30) = 78.539816 rad/s

Exact fraction: 750π/30 rad/s · Reciprocal: 78.54 rad/s × (30/π) = 750 RPM

Angular Velocity
78.539816 rad/s
Frequency
12.5 Hz
Degrees / Second
4,500 °/s
Period per Rev
0.08 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 78.54 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

750 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

750 RPM = 25π rad/s ≈ 78.539816 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 78.525 rad/s instead of the exact 78.5398 rad/s — an error of 0.01482 rad/s.

What this speed looks like in practice

That is the typical speed of a car engine at idle. At 750 RPM a shaft turns about 3.75× as fast as a ceiling fan on high. A washing machine spin cycle turns about 1.6× faster.

Revolutions over time

That is 45,000 revolutions per hour and 1,080,000 per day. A quarter turn (90°) takes 20 ms, and the shaft sweeps 4.5° every millisecond.

Rim speed and centripetal load at ω = 78.5398 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.7854 m/s · 2.827 km/h61.69 m/s² · 6.29 g
5 cm10 cm3.927 m/s · 14.14 km/h308.4 m/s² · 31.45 g
10 cm20 cm7.854 m/s · 28.27 km/h616.9 m/s² · 62.9 g
25 cm50 cm19.63 m/s · 70.69 km/h1,542 m/s² · 157.3 g
50 cm1 m39.27 m/s · 141.4 km/h3,084 m/s² · 314.5 g
1 m2 m78.54 m/s · 282.7 km/h6,169 m/s² · 629 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 750 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
212.5 HzReachable with a VFD
425 HzReachable with a VFD
637.5 HzReachable with a VFD
850 HzStandard speed on a 50 Hz grid

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1250 RPM · 26.18 rad/s×3
5:1150 RPM · 15.71 rad/s×5
10:175 RPM · 7.854 rad/s×10
30:125 RPM · 2.618 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)3.084 J
0.01 kg·m² (bench-grinder wheel)30.84 J
0.1 kg·m² (car flywheel)308.4 J
1 kg·m² (industrial flywheel)3.084 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions