RPM to Radians Per SecondRPM to rad/s

1,800 RPM to Radians Per Second Converter

Instant conversion for 1,800 RPM to rad/s (188.495559 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result188.495559 rad/s
Radians per Second (rad/s)
188.49556
Degrees per Second (°/s)
10,800 °/s
Hertz (Hz)
30 Hz
Revolutions per Second (RPS)
30 rev/s
Revolutions per Hour (RPH)
108,000 rev/hr
Revolutions per Day
2,592,000 rev/day
Radians per Minute (rad/min)
11,309.734 rad/min
Milliradians per Second (mrad/s)
188,495.56 mrad/s
Period (seconds per rev)
0.033333 s/rev
Exact Formula
1800 × π/30 = 188.49556 rad/s
Nearest Real-World Example
Power drill (2,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):188.495559 rad/s
Rounded (0.10472):188.496000 rad/s
Angular Error / Hour:90.92° / hr

Worked Conversion: 1,800 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 1800 × (π / 30) = 188.495559 rad/s

Exact fraction: 1800π/30 rad/s · Reciprocal: 188.5 rad/s × (30/π) = 1,800 RPM

Angular Velocity
188.495559 rad/s
Frequency
30 Hz
Degrees / Second
10,800 °/s
Period per Rev
0.0333 s
Engineering Context: 1,800 RPM is the synchronous speed of a 4-pole machine on 60 Hz, so it anchors most North American pump, fan and generator ratings.

Reverse Conversion: 188.5 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

★ 1800 RPM in rad/s = 60π (188.50): 4-Pole 60 Hz Motors — Why 4-pole AC induction motors run at this synchronous speed and how rotor slip impacts calculations.
5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

1,800 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,800 RPM = 60π rad/s ≈ 188.495559 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 188.46 rad/s instead of the exact 188.4956 rad/s — an error of 0.03556 rad/s.

What this speed looks like in practice

That is the typical speed of a 4-pole motor on a 60 Hz grid. At 1,800 RPM a shaft turns about 1.5× as fast as a washing machine spin cycle. A laptop hard drive (5,400 RPM) turns about 3× faster.

Revolutions over time

That is 108,000 revolutions per hour and 2,592,000 per day. A quarter turn (90°) takes 8.33 ms, and the shaft sweeps 10.8° every millisecond.

Rim speed and centripetal load at ω = 188.4956 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.885 m/s · 6.786 km/h355.3 m/s² · 36.23 g
5 cm10 cm9.425 m/s · 33.93 km/h1,777 m/s² · 181.2 g
10 cm20 cm18.85 m/s · 67.86 km/h3,553 m/s² · 362.3 g
25 cm50 cm47.12 m/s · 169.6 km/h8,883 m/s² · 905.8 g
50 cm1 m94.25 m/s · 339.3 km/h17,770 m/s² · 1,812 g
1 m2 m188.5 m/s · 678.6 km/h35,530 m/s² · 3,623 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,800 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
230 HzReachable with a VFD
460 HzStandard speed on a 60 Hz grid
690 HzReachable with a VFD
8120 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1600 RPM · 62.83 rad/s×3
5:1360 RPM · 37.7 rad/s×5
10:1180 RPM · 18.85 rad/s×10
30:160 RPM · 6.283 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)17.77 J
0.01 kg·m² (bench-grinder wheel)177.7 J
0.1 kg·m² (car flywheel)1.777 kJ
1 kg·m² (industrial flywheel)17.77 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions