120 RPM to Radians Per Second Converter
Instant conversion for 120 RPM to rad/s (12.566371 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 12.566371
- Degrees per Second (°/s)
- 720 °/s
- Hertz (Hz)
- 2 Hz
- Revolutions per Second (RPS)
- 2 rev/s
- Revolutions per Hour (RPH)
- 7,200 rev/hr
- Revolutions per Day
- 172,800 rev/day
- Radians per Minute (rad/min)
- 753.98224 rad/min
- Milliradians per Second (mrad/s)
- 12,566.371 mrad/s
- Period (seconds per rev)
- 0.5 s/rev
- Exact Formula
- 120 × π/30 = 12.566371 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 120 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 120 × (π / 30) = 12.566371 rad/s
Exact fraction: 120π/30 rad/s · Reciprocal: 12.566 rad/s × (30/π) = 120 RPM
Reverse Conversion: 12.566 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
120 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
120 RPM = 4π rad/s ≈ 12.566371 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 12.564 rad/s instead of the exact 12.5664 rad/s — an error of 0.002371 rad/s.
What this speed looks like in practice
At 120 RPM a shaft turns about 2.67× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.67× faster.
Revolutions over time
That is 7,200 revolutions per hour and 172,800 per day. A quarter turn (90°) takes 125 ms, and the shaft sweeps 0.72° every millisecond.
Rim speed and centripetal load at ω = 12.5664 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1257 m/s · 0.4524 km/h | 1.579 m/s² · 0.161 g |
| 5 cm | 10 cm | 0.6283 m/s · 2.262 km/h | 7.896 m/s² · 0.8051 g |
| 10 cm | 20 cm | 1.257 m/s · 4.524 km/h | 15.79 m/s² · 1.61 g |
| 25 cm | 50 cm | 3.142 m/s · 11.31 km/h | 39.48 m/s² · 4.026 g |
| 50 cm | 1 m | 6.283 m/s · 22.62 km/h | 78.96 m/s² · 8.051 g |
| 1 m | 2 m | 12.57 m/s · 45.24 km/h | 157.9 m/s² · 16.1 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 120 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2 Hz | Below typical VFD range — use a gearbox |
| 4 | 4 Hz | Below typical VFD range — use a gearbox |
| 6 | 6 Hz | Reachable with a VFD |
| 8 | 8 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 40 RPM · 4.189 rad/s | ×3 |
| 5:1 | 24 RPM · 2.513 rad/s | ×5 |
| 10:1 | 12 RPM · 1.257 rad/s | ×10 |
| 30:1 | 4 RPM · 0.4189 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.07896 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.7896 J |
| 0.1 kg·m² (car flywheel) | 7.896 J |
| 1 kg·m² (industrial flywheel) | 78.96 J |
Multiples of this speed
- 0.5× = 60 RPM6.2832 rad/s
- 2× = 240 RPM25.1327 rad/s
- 5× = 600 RPM62.8319 rad/s
- 10× = 1,200 RPM125.6637 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 120 RPM to radians per second, multiply 120 by π and divide by 30: 120 × (π / 30) = 12.566371 rad/s (approx. 12.566 rad/s).
120 RPM equals 2.0000 Hz (revolutions per second), calculated by dividing 120 by 60 seconds.
To convert 12.566 rad/s back to RPM, multiply by 30 and divide by π: 12.566 × (30 / π) ≈ 120 RPM.
At 120 RPM, one full 360° revolution takes 0.5 seconds (500.00 ms).
A 4-pole induction motor has a synchronous speed of 120 RPM at 4 Hz (f = RPM × poles / 120 = 120 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 12.566371 rad/s × 0.1 m = 1.2566 m/s (4.5239 km/h). The centripetal acceleration at the rim is ω²·r = 15.7914 m/s².