1,000 RPM to Radians Per Second Converter
Instant conversion for 1,000 RPM to rad/s (104.719755 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 104.71976
- Degrees per Second (°/s)
- 6,000 °/s
- Hertz (Hz)
- 16.666667 Hz
- Revolutions per Second (RPS)
- 16.666667 rev/s
- Revolutions per Hour (RPH)
- 60,000 rev/hr
- Revolutions per Day
- 1,440,000 rev/day
- Radians per Minute (rad/min)
- 6,283.1853 rad/min
- Milliradians per Second (mrad/s)
- 104,719.76 mrad/s
- Period (seconds per rev)
- 0.06 s/rev
- Exact Formula
- 1000 × π/30 = 104.71976 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1000 × (π / 30) = 104.719755 rad/s
Exact fraction: 1000π/30 rad/s · Reciprocal: 104.72 rad/s × (30/π) = 1,000 RPM
Reverse Conversion: 104.72 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,000 RPM = 100π/3 rad/s ≈ 104.719755 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 104.7 rad/s instead of the exact 104.7198 rad/s — an error of 0.01976 rad/s.
What this speed looks like in practice
At 1,000 RPM a shaft turns about 1.33× as fast as a car engine at idle. A washing machine spin cycle turns about 1.2× faster.
Revolutions over time
That is 60,000 revolutions per hour and 1,440,000 per day. A quarter turn (90°) takes 15 ms, and the shaft sweeps 6° every millisecond.
Rim speed and centripetal load at ω = 104.7198 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.047 m/s · 3.77 km/h | 109.7 m/s² · 11.18 g |
| 5 cm | 10 cm | 5.236 m/s · 18.85 km/h | 548.3 m/s² · 55.91 g |
| 10 cm | 20 cm | 10.47 m/s · 37.7 km/h | 1,097 m/s² · 111.8 g |
| 25 cm | 50 cm | 26.18 m/s · 94.25 km/h | 2,742 m/s² · 279.6 g |
| 50 cm | 1 m | 52.36 m/s · 188.5 km/h | 5,483 m/s² · 559.1 g |
| 1 m | 2 m | 104.7 m/s · 377 km/h | 10,970 m/s² · 1,118 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 16.67 Hz | Reachable with a VFD |
| 4 | 33.33 Hz | Reachable with a VFD |
| 6 | 50 Hz | Standard speed on a 50 Hz grid |
| 8 | 66.67 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 333.3 RPM · 34.91 rad/s | ×3 |
| 5:1 | 200 RPM · 20.94 rad/s | ×5 |
| 10:1 | 100 RPM · 10.47 rad/s | ×10 |
| 30:1 | 33.33 RPM · 3.491 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 5.483 J |
| 0.01 kg·m² (bench-grinder wheel) | 54.83 J |
| 0.1 kg·m² (car flywheel) | 548.3 J |
| 1 kg·m² (industrial flywheel) | 5.483 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,000 RPM to radians per second, multiply 1000 by π and divide by 30: 1000 × (π / 30) = 104.719755 rad/s (approx. 104.72 rad/s).
1,000 RPM equals 16.6667 Hz (revolutions per second), calculated by dividing 1000 by 60 seconds.
To convert 104.72 rad/s back to RPM, multiply by 30 and divide by π: 104.72 × (30 / π) ≈ 1,000 RPM.
At 1,000 RPM, one full 360° revolution takes 0.06 seconds (60.00 ms).
A 4-pole induction motor has a synchronous speed of 1,000 RPM at 33.3333 Hz (f = RPM × poles / 120 = 1000 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 104.719755 rad/s × 0.1 m = 10.472 m/s (37.6991 km/h). The centripetal acceleration at the rim is ω²·r = 1096.6227 m/s².