700 RPM to Radians Per Second Converter
Instant conversion for 700 RPM to rad/s (73.303829 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 73.303829
- Degrees per Second (°/s)
- 4,200 °/s
- Hertz (Hz)
- 11.666667 Hz
- Revolutions per Second (RPS)
- 11.666667 rev/s
- Revolutions per Hour (RPH)
- 42,000 rev/hr
- Revolutions per Day
- 1,008,000 rev/day
- Radians per Minute (rad/min)
- 4,398.2297 rad/min
- Milliradians per Second (mrad/s)
- 73,303.829 mrad/s
- Period (seconds per rev)
- 0.085714 s/rev
- Exact Formula
- 700 × π/30 = 73.303829 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 700 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 700 × (π / 30) = 73.303829 rad/s
Exact fraction: 700π/30 rad/s · Reciprocal: 73.304 rad/s × (30/π) = 700 RPM
Reverse Conversion: 73.304 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
700 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
700 RPM = 70π/3 rad/s ≈ 73.303829 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 73.29 rad/s instead of the exact 73.3038 rad/s — an error of 0.01383 rad/s.
What this speed looks like in practice
At 700 RPM a shaft turns about 3.5× as fast as a ceiling fan on high. A car engine at idle turns about 1.07× faster.
Revolutions over time
That is 42,000 revolutions per hour and 1,008,000 per day. A quarter turn (90°) takes 21.4 ms, and the shaft sweeps 4.2° every millisecond.
Rim speed and centripetal load at ω = 73.3038 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.733 m/s · 2.639 km/h | 53.73 m/s² · 5.479 g |
| 5 cm | 10 cm | 3.665 m/s · 13.19 km/h | 268.7 m/s² · 27.4 g |
| 10 cm | 20 cm | 7.33 m/s · 26.39 km/h | 537.3 m/s² · 54.79 g |
| 25 cm | 50 cm | 18.33 m/s · 65.97 km/h | 1,343 m/s² · 137 g |
| 50 cm | 1 m | 36.65 m/s · 131.9 km/h | 2,687 m/s² · 274 g |
| 1 m | 2 m | 73.3 m/s · 263.9 km/h | 5,373 m/s² · 547.9 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 700 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 11.67 Hz | Reachable with a VFD |
| 4 | 23.33 Hz | Reachable with a VFD |
| 6 | 35 Hz | Reachable with a VFD |
| 8 | 46.67 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 233.3 RPM · 24.43 rad/s | ×3 |
| 5:1 | 140 RPM · 14.66 rad/s | ×5 |
| 10:1 | 70 RPM · 7.33 rad/s | ×10 |
| 30:1 | 23.33 RPM · 2.443 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 2.687 J |
| 0.01 kg·m² (bench-grinder wheel) | 26.87 J |
| 0.1 kg·m² (car flywheel) | 268.7 J |
| 1 kg·m² (industrial flywheel) | 2.687 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 700 RPM to radians per second, multiply 700 by π and divide by 30: 700 × (π / 30) = 73.303829 rad/s (approx. 73.304 rad/s).
700 RPM equals 11.6667 Hz (revolutions per second), calculated by dividing 700 by 60 seconds.
To convert 73.304 rad/s back to RPM, multiply by 30 and divide by π: 73.304 × (30 / π) ≈ 700 RPM.
At 700 RPM, one full 360° revolution takes 0.0857 seconds (85.71 ms).
A 4-pole induction motor has a synchronous speed of 700 RPM at 23.3333 Hz (f = RPM × poles / 120 = 700 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 73.303829 rad/s × 0.1 m = 7.3304 m/s (26.3894 km/h). The centripetal acceleration at the rim is ω²·r = 537.3451 m/s².