70 RPM to Radians Per Second Converter
Instant conversion for 70 RPM to rad/s (7.330383 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 7.3303829
- Degrees per Second (°/s)
- 420 °/s
- Hertz (Hz)
- 1.166667 Hz
- Revolutions per Second (RPS)
- 1.166667 rev/s
- Revolutions per Hour (RPH)
- 4,200 rev/hr
- Revolutions per Day
- 100,800 rev/day
- Radians per Minute (rad/min)
- 439.82297 rad/min
- Milliradians per Second (mrad/s)
- 7,330.3829 mrad/s
- Period (seconds per rev)
- 0.857143 s/rev
- Exact Formula
- 70 × π/30 = 7.3303829 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 70 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 70 × (π / 30) = 7.330383 rad/s
Exact fraction: 70π/30 rad/s · Reciprocal: 7.33 rad/s × (30/π) = 70 RPM
Reverse Conversion: 7.33 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
70 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
70 RPM = 7π/3 rad/s ≈ 7.330383 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 7.329 rad/s instead of the exact 7.3304 rad/s — an error of 0.001383 rad/s.
What this speed looks like in practice
At 70 RPM a shaft turns about 1.56× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.86× faster.
Revolutions over time
That is 4,200 revolutions per hour and 100,800 per day. A quarter turn (90°) takes 214 ms, and the shaft sweeps 0.42° every millisecond.
Rim speed and centripetal load at ω = 7.3304 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.0733 m/s · 0.2639 km/h | 0.5373 m/s² · 0.05479 g |
| 5 cm | 10 cm | 0.3665 m/s · 1.319 km/h | 2.687 m/s² · 0.274 g |
| 10 cm | 20 cm | 0.733 m/s · 2.639 km/h | 5.373 m/s² · 0.5479 g |
| 25 cm | 50 cm | 1.833 m/s · 6.597 km/h | 13.43 m/s² · 1.37 g |
| 50 cm | 1 m | 3.665 m/s · 13.19 km/h | 26.87 m/s² · 2.74 g |
| 1 m | 2 m | 7.33 m/s · 26.39 km/h | 53.73 m/s² · 5.479 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 70 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.167 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.333 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.5 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.667 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 23.33 RPM · 2.443 rad/s | ×3 |
| 5:1 | 14 RPM · 1.466 rad/s | ×5 |
| 10:1 | 7 RPM · 0.733 rad/s | ×10 |
| 30:1 | 2.333 RPM · 0.2443 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02687 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2687 J |
| 0.1 kg·m² (car flywheel) | 2.687 J |
| 1 kg·m² (industrial flywheel) | 26.87 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 70 RPM to radians per second, multiply 70 by π and divide by 30: 70 × (π / 30) = 7.330383 rad/s (approx. 7.33 rad/s).
70 RPM equals 1.1667 Hz (revolutions per second), calculated by dividing 70 by 60 seconds.
To convert 7.33 rad/s back to RPM, multiply by 30 and divide by π: 7.33 × (30 / π) ≈ 70 RPM.
At 70 RPM, one full 360° revolution takes 0.8571 seconds (857.14 ms).
A 4-pole induction motor has a synchronous speed of 70 RPM at 2.3333 Hz (f = RPM × poles / 120 = 70 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 7.330383 rad/s × 0.1 m = 0.733 m/s (2.6389 km/h). The centripetal acceleration at the rim is ω²·r = 5.3735 m/s².