3,500 RPM to Radians Per Second Converter
Instant conversion for 3,500 RPM to rad/s (366.519143 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 366.51914
- Degrees per Second (°/s)
- 21,000 °/s
- Hertz (Hz)
- 58.333333 Hz
- Revolutions per Second (RPS)
- 58.333333 rev/s
- Revolutions per Hour (RPH)
- 210,000 rev/hr
- Revolutions per Day
- 5,040,000 rev/day
- Radians per Minute (rad/min)
- 21,991.149 rad/min
- Milliradians per Second (mrad/s)
- 366,519.14 mrad/s
- Period (seconds per rev)
- 0.017143 s/rev
- Exact Formula
- 3500 × π/30 = 366.51914 rad/s
- Nearest Real-World Example
- Car engine — highway (2,500 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3,500 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 3500 × (π / 30) = 366.519143 rad/s
Exact fraction: 3500π/30 rad/s · Reciprocal: 366.52 rad/s × (30/π) = 3,500 RPM
Reverse Conversion: 366.52 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
3,500 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
3,500 RPM = 350π/3 rad/s ≈ 366.519143 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 366.45 rad/s instead of the exact 366.5191 rad/s — an error of 0.06914 rad/s.
What this speed looks like in practice
At 3,500 RPM a shaft turns about 1.94× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.54× faster.
Revolutions over time
That is 210,000 revolutions per hour and 5,040,000 per day. A quarter turn (90°) takes 4.29 ms, and the shaft sweeps 21° every millisecond.
Rim speed and centripetal load at ω = 366.5191 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 3.665 m/s · 13.19 km/h | 1,343 m/s² · 137 g |
| 5 cm | 10 cm | 18.33 m/s · 65.97 km/h | 6,717 m/s² · 684.9 g |
| 10 cm | 20 cm | 36.65 m/s · 131.9 km/h | 13,430 m/s² · 1,370 g |
| 25 cm | 50 cm | 91.63 m/s · 329.9 km/h | 33,580 m/s² · 3,425 g |
| 50 cm | 1 m | 183.3 m/s · 659.7 km/h | 67,170 m/s² · 6,849 g |
| 1 m | 2 m | 366.5 m/s · 1,319 km/h | 134,300 m/s² · 13,700 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 3,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 58.33 Hz | Reachable with a VFD |
| 4 | 116.7 Hz | Reachable with a VFD |
| 6 | 175 Hz | Above typical VFD range |
| 8 | 233.3 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,167 RPM · 122.2 rad/s | ×3 |
| 5:1 | 700 RPM · 73.3 rad/s | ×5 |
| 10:1 | 350 RPM · 36.65 rad/s | ×10 |
| 30:1 | 116.7 RPM · 12.22 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 67.17 J |
| 0.01 kg·m² (bench-grinder wheel) | 671.7 J |
| 0.1 kg·m² (car flywheel) | 6.717 kJ |
| 1 kg·m² (industrial flywheel) | 67.17 kJ |
Multiples of this speed
- 0.5× = 1,750 RPM183.2596 rad/s
- 2× = 7,000 RPM733.0383 rad/s
- 5× = 17,500 RPM1,832.5957 rad/s
- 10× = 35,000 RPM3,665.1914 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3,500 RPM to radians per second, multiply 3500 by π and divide by 30: 3500 × (π / 30) = 366.519143 rad/s (approx. 366.52 rad/s).
3,500 RPM equals 58.3333 Hz (revolutions per second), calculated by dividing 3500 by 60 seconds.
To convert 366.52 rad/s back to RPM, multiply by 30 and divide by π: 366.52 × (30 / π) ≈ 3,500 RPM.
At 3,500 RPM, one full 360° revolution takes 0.0171 seconds (17.14 ms).
A 4-pole induction motor has a synchronous speed of 3,500 RPM at 116.6667 Hz (f = RPM × poles / 120 = 3500 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 366.519143 rad/s × 0.1 m = 36.6519 m/s (131.9469 km/h). The centripetal acceleration at the rim is ω²·r = 13433.6282 m/s².