350 RPM to Radians Per Second Converter
Instant conversion for 350 RPM to rad/s (36.651914 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 36.651914
- Degrees per Second (°/s)
- 2,100 °/s
- Hertz (Hz)
- 5.833333 Hz
- Revolutions per Second (RPS)
- 5.833333 rev/s
- Revolutions per Hour (RPH)
- 21,000 rev/hr
- Revolutions per Day
- 504,000 rev/day
- Radians per Minute (rad/min)
- 2,199.1149 rad/min
- Milliradians per Second (mrad/s)
- 36,651.914 mrad/s
- Period (seconds per rev)
- 0.171429 s/rev
- Exact Formula
- 350 × π/30 = 36.651914 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 350 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 350 × (π / 30) = 36.651914 rad/s
Exact fraction: 350π/30 rad/s · Reciprocal: 36.652 rad/s × (30/π) = 350 RPM
Reverse Conversion: 36.652 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
350 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
350 RPM = 35π/3 rad/s ≈ 36.651914 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 36.645 rad/s instead of the exact 36.6519 rad/s — an error of 0.006914 rad/s.
What this speed looks like in practice
At 350 RPM a shaft turns about 1.75× as fast as a ceiling fan on high. A car engine at idle turns about 2.14× faster.
Revolutions over time
That is 21,000 revolutions per hour and 504,000 per day. A quarter turn (90°) takes 42.9 ms, and the shaft sweeps 2.1° every millisecond.
Rim speed and centripetal load at ω = 36.6519 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.3665 m/s · 1.319 km/h | 13.43 m/s² · 1.37 g |
| 5 cm | 10 cm | 1.833 m/s · 6.597 km/h | 67.17 m/s² · 6.849 g |
| 10 cm | 20 cm | 3.665 m/s · 13.19 km/h | 134.3 m/s² · 13.7 g |
| 25 cm | 50 cm | 9.163 m/s · 32.99 km/h | 335.8 m/s² · 34.25 g |
| 50 cm | 1 m | 18.33 m/s · 65.97 km/h | 671.7 m/s² · 68.49 g |
| 1 m | 2 m | 36.65 m/s · 131.9 km/h | 1,343 m/s² · 137 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 350 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 5.833 Hz | Reachable with a VFD |
| 4 | 11.67 Hz | Reachable with a VFD |
| 6 | 17.5 Hz | Reachable with a VFD |
| 8 | 23.33 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 116.7 RPM · 12.22 rad/s | ×3 |
| 5:1 | 70 RPM · 7.33 rad/s | ×5 |
| 10:1 | 35 RPM · 3.665 rad/s | ×10 |
| 30:1 | 11.67 RPM · 1.222 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.6717 J |
| 0.01 kg·m² (bench-grinder wheel) | 6.717 J |
| 0.1 kg·m² (car flywheel) | 67.17 J |
| 1 kg·m² (industrial flywheel) | 671.7 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 350 RPM to radians per second, multiply 350 by π and divide by 30: 350 × (π / 30) = 36.651914 rad/s (approx. 36.652 rad/s).
350 RPM equals 5.8333 Hz (revolutions per second), calculated by dividing 350 by 60 seconds.
To convert 36.652 rad/s back to RPM, multiply by 30 and divide by π: 36.652 × (30 / π) ≈ 350 RPM.
At 350 RPM, one full 360° revolution takes 0.1714 seconds (171.43 ms).
A 4-pole induction motor has a synchronous speed of 350 RPM at 11.6667 Hz (f = RPM × poles / 120 = 350 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 36.651914 rad/s × 0.1 m = 3.6652 m/s (13.1947 km/h). The centripetal acceleration at the rim is ω²·r = 134.3363 m/s².