RPM to Radians Per SecondRPM to rad/s

800 RPM to Radians Per Second Converter

Instant conversion for 800 RPM to rad/s (83.775804 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result83.775804 rad/s
Radians per Second (rad/s)
83.775804
Degrees per Second (°/s)
4,800 °/s
Hertz (Hz)
13.333333 Hz
Revolutions per Second (RPS)
13.333333 rev/s
Revolutions per Hour (RPH)
48,000 rev/hr
Revolutions per Day
1,152,000 rev/day
Radians per Minute (rad/min)
5,026.5482 rad/min
Milliradians per Second (mrad/s)
83,775.804 mrad/s
Period (seconds per rev)
0.075 s/rev
Exact Formula
800 × π/30 = 83.775804 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):83.775804 rad/s
Rounded (0.10472):83.776000 rad/s
Angular Error / Hour:40.41° / hr

Worked Conversion: 800 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 800 × (π / 30) = 83.775804 rad/s

Exact fraction: 800π/30 rad/s · Reciprocal: 83.776 rad/s × (30/π) = 800 RPM

Angular Velocity
83.775804 rad/s
Frequency
13.3333 Hz
Degrees / Second
4,800 °/s
Period per Rev
0.075 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 83.776 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

800 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

800 RPM = 80π/3 rad/s ≈ 83.775804 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 83.76 rad/s instead of the exact 83.7758 rad/s — an error of 0.0158 rad/s.

What this speed looks like in practice

At 800 RPM a shaft turns about 1.07× as fast as a car engine at idle. A washing machine spin cycle turns about 1.5× faster.

Revolutions over time

That is 48,000 revolutions per hour and 1,152,000 per day. A quarter turn (90°) takes 18.8 ms, and the shaft sweeps 4.8° every millisecond.

Rim speed and centripetal load at ω = 83.7758 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.8378 m/s · 3.016 km/h70.18 m/s² · 7.157 g
5 cm10 cm4.189 m/s · 15.08 km/h350.9 m/s² · 35.78 g
10 cm20 cm8.378 m/s · 30.16 km/h701.8 m/s² · 71.57 g
25 cm50 cm20.94 m/s · 75.4 km/h1,755 m/s² · 178.9 g
50 cm1 m41.89 m/s · 150.8 km/h3,509 m/s² · 357.8 g
1 m2 m83.78 m/s · 301.6 km/h7,018 m/s² · 715.7 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 800 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
213.33 HzReachable with a VFD
426.67 HzReachable with a VFD
640 HzReachable with a VFD
853.33 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1266.7 RPM · 27.93 rad/s×3
5:1160 RPM · 16.76 rad/s×5
10:180 RPM · 8.378 rad/s×10
30:126.67 RPM · 2.793 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)3.509 J
0.01 kg·m² (bench-grinder wheel)35.09 J
0.1 kg·m² (car flywheel)350.9 J
1 kg·m² (industrial flywheel)3.509 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions