1,400 RPM to Radians Per Second Converter
Instant conversion for 1,400 RPM to rad/s (146.607657 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 146.60766
- Degrees per Second (°/s)
- 8,400 °/s
- Hertz (Hz)
- 23.333333 Hz
- Revolutions per Second (RPS)
- 23.333333 rev/s
- Revolutions per Hour (RPH)
- 84,000 rev/hr
- Revolutions per Day
- 2,016,000 rev/day
- Radians per Minute (rad/min)
- 8,796.4594 rad/min
- Milliradians per Second (mrad/s)
- 146,607.66 mrad/s
- Period (seconds per rev)
- 0.042857 s/rev
- Exact Formula
- 1400 × π/30 = 146.60766 rad/s
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,400 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1400 × (π / 30) = 146.607657 rad/s
Exact fraction: 1400π/30 rad/s · Reciprocal: 146.61 rad/s × (30/π) = 1,400 RPM
Reverse Conversion: 146.61 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,400 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,400 RPM = 140π/3 rad/s ≈ 146.607657 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 146.58 rad/s instead of the exact 146.6077 rad/s — an error of 0.02766 rad/s.
What this speed looks like in practice
At 1,400 RPM a shaft turns about 1.17× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.29× faster.
Revolutions over time
That is 84,000 revolutions per hour and 2,016,000 per day. A quarter turn (90°) takes 10.7 ms, and the shaft sweeps 8.4° every millisecond.
Rim speed and centripetal load at ω = 146.6077 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.466 m/s · 5.278 km/h | 214.9 m/s² · 21.92 g |
| 5 cm | 10 cm | 7.33 m/s · 26.39 km/h | 1,075 m/s² · 109.6 g |
| 10 cm | 20 cm | 14.66 m/s · 52.78 km/h | 2,149 m/s² · 219.2 g |
| 25 cm | 50 cm | 36.65 m/s · 131.9 km/h | 5,373 m/s² · 547.9 g |
| 50 cm | 1 m | 73.3 m/s · 263.9 km/h | 10,750 m/s² · 1,096 g |
| 1 m | 2 m | 146.6 m/s · 527.8 km/h | 21,490 m/s² · 2,192 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,400 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 23.33 Hz | Reachable with a VFD |
| 4 | 46.67 Hz | Reachable with a VFD |
| 6 | 70 Hz | Reachable with a VFD |
| 8 | 93.33 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 466.7 RPM · 48.87 rad/s | ×3 |
| 5:1 | 280 RPM · 29.32 rad/s | ×5 |
| 10:1 | 140 RPM · 14.66 rad/s | ×10 |
| 30:1 | 46.67 RPM · 4.887 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 10.75 J |
| 0.01 kg·m² (bench-grinder wheel) | 107.5 J |
| 0.1 kg·m² (car flywheel) | 1.075 kJ |
| 1 kg·m² (industrial flywheel) | 10.75 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,400 RPM to radians per second, multiply 1400 by π and divide by 30: 1400 × (π / 30) = 146.607657 rad/s (approx. 146.61 rad/s).
1,400 RPM equals 23.3333 Hz (revolutions per second), calculated by dividing 1400 by 60 seconds.
To convert 146.61 rad/s back to RPM, multiply by 30 and divide by π: 146.61 × (30 / π) ≈ 1,400 RPM.
At 1,400 RPM, one full 360° revolution takes 0.0429 seconds (42.86 ms).
A 4-pole induction motor has a synchronous speed of 1,400 RPM at 46.6667 Hz (f = RPM × poles / 120 = 1400 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 146.607657 rad/s × 0.1 m = 14.6608 m/s (52.7788 km/h). The centripetal acceleration at the rim is ω²·r = 2149.3805 m/s².