160 RPM to Radians Per Second Converter
Instant conversion for 160 RPM to rad/s (16.755161 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 16.755161
- Degrees per Second (°/s)
- 960 °/s
- Hertz (Hz)
- 2.666667 Hz
- Revolutions per Second (RPS)
- 2.666667 rev/s
- Revolutions per Hour (RPH)
- 9,600 rev/hr
- Revolutions per Day
- 230,400 rev/day
- Radians per Minute (rad/min)
- 1,005.3096 rad/min
- Milliradians per Second (mrad/s)
- 16,755.161 mrad/s
- Period (seconds per rev)
- 0.375 s/rev
- Exact Formula
- 160 × π/30 = 16.755161 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 160 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 160 × (π / 30) = 16.755161 rad/s
Exact fraction: 160π/30 rad/s · Reciprocal: 16.755 rad/s × (30/π) = 160 RPM
Reverse Conversion: 16.755 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
160 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
160 RPM = 16π/3 rad/s ≈ 16.755161 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 16.752 rad/s instead of the exact 16.7552 rad/s — an error of 0.003161 rad/s.
What this speed looks like in practice
At 160 RPM a shaft turns about 3.56× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.25× faster.
Revolutions over time
That is 9,600 revolutions per hour and 230,400 per day. A quarter turn (90°) takes 93.8 ms, and the shaft sweeps 0.96° every millisecond.
Rim speed and centripetal load at ω = 16.7552 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1676 m/s · 0.6032 km/h | 2.807 m/s² · 0.2863 g |
| 5 cm | 10 cm | 0.8378 m/s · 3.016 km/h | 14.04 m/s² · 1.431 g |
| 10 cm | 20 cm | 1.676 m/s · 6.032 km/h | 28.07 m/s² · 2.863 g |
| 25 cm | 50 cm | 4.189 m/s · 15.08 km/h | 70.18 m/s² · 7.157 g |
| 50 cm | 1 m | 8.378 m/s · 30.16 km/h | 140.4 m/s² · 14.31 g |
| 1 m | 2 m | 16.76 m/s · 60.32 km/h | 280.7 m/s² · 28.63 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 160 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.667 Hz | Below typical VFD range — use a gearbox |
| 4 | 5.333 Hz | Reachable with a VFD |
| 6 | 8 Hz | Reachable with a VFD |
| 8 | 10.67 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 53.33 RPM · 5.585 rad/s | ×3 |
| 5:1 | 32 RPM · 3.351 rad/s | ×5 |
| 10:1 | 16 RPM · 1.676 rad/s | ×10 |
| 30:1 | 5.333 RPM · 0.5585 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.1404 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.404 J |
| 0.1 kg·m² (car flywheel) | 14.04 J |
| 1 kg·m² (industrial flywheel) | 140.4 J |
Multiples of this speed
- 0.5× = 80 RPM8.3776 rad/s
- 2× = 320 RPM33.5103 rad/s
- 5× = 800 RPM83.7758 rad/s
- 10× = 1,600 RPM167.5516 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 160 RPM to radians per second, multiply 160 by π and divide by 30: 160 × (π / 30) = 16.755161 rad/s (approx. 16.755 rad/s).
160 RPM equals 2.6667 Hz (revolutions per second), calculated by dividing 160 by 60 seconds.
To convert 16.755 rad/s back to RPM, multiply by 30 and divide by π: 16.755 × (30 / π) ≈ 160 RPM.
At 160 RPM, one full 360° revolution takes 0.375 seconds (375.00 ms).
A 4-pole induction motor has a synchronous speed of 160 RPM at 5.3333 Hz (f = RPM × poles / 120 = 160 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 16.755161 rad/s × 0.1 m = 1.6755 m/s (6.0319 km/h). The centripetal acceleration at the rim is ω²·r = 28.0735 m/s².