80 RPM to Radians Per Second Converter
Instant conversion for 80 RPM to rad/s (8.377580 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 8.3775804
- Degrees per Second (°/s)
- 480 °/s
- Hertz (Hz)
- 1.333333 Hz
- Revolutions per Second (RPS)
- 1.333333 rev/s
- Revolutions per Hour (RPH)
- 4,800 rev/hr
- Revolutions per Day
- 115,200 rev/day
- Radians per Minute (rad/min)
- 502.65482 rad/min
- Milliradians per Second (mrad/s)
- 8,377.5804 mrad/s
- Period (seconds per rev)
- 0.75 s/rev
- Exact Formula
- 80 × π/30 = 8.3775804 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 80 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 80 × (π / 30) = 8.377580 rad/s
Exact fraction: 80π/30 rad/s · Reciprocal: 8.378 rad/s × (30/π) = 80 RPM
Reverse Conversion: 8.378 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
80 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
80 RPM = 8π/3 rad/s ≈ 8.37758 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 8.376 rad/s instead of the exact 8.3776 rad/s — an error of 0.00158 rad/s.
What this speed looks like in practice
At 80 RPM a shaft turns about 1.78× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.5× faster.
Revolutions over time
That is 4,800 revolutions per hour and 115,200 per day. A quarter turn (90°) takes 188 ms, and the shaft sweeps 0.48° every millisecond.
Rim speed and centripetal load at ω = 8.3776 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.08378 m/s · 0.3016 km/h | 0.7018 m/s² · 0.07157 g |
| 5 cm | 10 cm | 0.4189 m/s · 1.508 km/h | 3.509 m/s² · 0.3578 g |
| 10 cm | 20 cm | 0.8378 m/s · 3.016 km/h | 7.018 m/s² · 0.7157 g |
| 25 cm | 50 cm | 2.094 m/s · 7.54 km/h | 17.55 m/s² · 1.789 g |
| 50 cm | 1 m | 4.189 m/s · 15.08 km/h | 35.09 m/s² · 3.578 g |
| 1 m | 2 m | 8.378 m/s · 30.16 km/h | 70.18 m/s² · 7.157 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 80 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.333 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.667 Hz | Below typical VFD range — use a gearbox |
| 6 | 4 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.333 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 26.67 RPM · 2.793 rad/s | ×3 |
| 5:1 | 16 RPM · 1.676 rad/s | ×5 |
| 10:1 | 8 RPM · 0.8378 rad/s | ×10 |
| 30:1 | 2.667 RPM · 0.2793 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.03509 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.3509 J |
| 0.1 kg·m² (car flywheel) | 3.509 J |
| 1 kg·m² (industrial flywheel) | 35.09 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 80 RPM to radians per second, multiply 80 by π and divide by 30: 80 × (π / 30) = 8.377580 rad/s (approx. 8.378 rad/s).
80 RPM equals 1.3333 Hz (revolutions per second), calculated by dividing 80 by 60 seconds.
To convert 8.378 rad/s back to RPM, multiply by 30 and divide by π: 8.378 × (30 / π) ≈ 80 RPM.
At 80 RPM, one full 360° revolution takes 0.75 seconds (750.00 ms).
A 4-pole induction motor has a synchronous speed of 80 RPM at 2.6667 Hz (f = RPM × poles / 120 = 80 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 8.377580 rad/s × 0.1 m = 0.8378 m/s (3.0159 km/h). The centripetal acceleration at the rim is ω²·r = 7.0184 m/s².