16 RPM to Radians Per Second Converter
Instant conversion for 16 RPM to rad/s (1.675516 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1.6755161
- Degrees per Second (°/s)
- 96 °/s
- Hertz (Hz)
- 0.266667 Hz
- Revolutions per Second (RPS)
- 0.266667 rev/s
- Revolutions per Hour (RPH)
- 960 rev/hr
- Revolutions per Day
- 23,040 rev/day
- Radians per Minute (rad/min)
- 100.53096 rad/min
- Milliradians per Second (mrad/s)
- 1,675.5161 mrad/s
- Period (seconds per rev)
- 3.75 s/rev
- Exact Formula
- 16 × π/30 = 1.6755161 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 16 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 16 × (π / 30) = 1.675516 rad/s
Exact fraction: 16π/30 rad/s · Reciprocal: 1.676 rad/s × (30/π) = 16 RPM
Reverse Conversion: 1.676 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
16 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
16 RPM = 8π/15 rad/s ≈ 1.675516 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1.6752 rad/s instead of the exact 1.6755 rad/s — an error of 0.0003161 rad/s.
What this speed looks like in practice
At 16 RPM a shaft turns about 1.07× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 2.08× faster.
Revolutions over time
That is 960 revolutions per hour and 23,040 per day. A quarter turn (90°) takes 938 ms, and the shaft sweeps 0.096° every millisecond.
Rim speed and centripetal load at ω = 1.6755 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.01676 m/s · 0.06032 km/h | 0.02807 m/s² · 0.002863 g |
| 5 cm | 10 cm | 0.08378 m/s · 0.3016 km/h | 0.1404 m/s² · 0.01431 g |
| 10 cm | 20 cm | 0.1676 m/s · 0.6032 km/h | 0.2807 m/s² · 0.02863 g |
| 25 cm | 50 cm | 0.4189 m/s · 1.508 km/h | 0.7018 m/s² · 0.07157 g |
| 50 cm | 1 m | 0.8378 m/s · 3.016 km/h | 1.404 m/s² · 0.1431 g |
| 1 m | 2 m | 1.676 m/s · 6.032 km/h | 2.807 m/s² · 0.2863 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 16 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.2667 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.5333 Hz | Below typical VFD range — use a gearbox |
| 6 | 0.8 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.067 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 5.333 RPM · 0.5585 rad/s | ×3 |
| 5:1 | 3.2 RPM · 0.3351 rad/s | ×5 |
| 10:1 | 1.6 RPM · 0.1676 rad/s | ×10 |
| 30:1 | 0.5333 RPM · 0.05585 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.001404 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.01404 J |
| 0.1 kg·m² (car flywheel) | 0.1404 J |
| 1 kg·m² (industrial flywheel) | 1.404 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 16 RPM to radians per second, multiply 16 by π and divide by 30: 16 × (π / 30) = 1.675516 rad/s (approx. 1.676 rad/s).
16 RPM equals 0.2667 Hz (revolutions per second), calculated by dividing 16 by 60 seconds.
To convert 1.676 rad/s back to RPM, multiply by 30 and divide by π: 1.676 × (30 / π) ≈ 16 RPM.
At 16 RPM, one full 360° revolution takes 3.75 seconds (3750.00 ms).
A 4-pole induction motor has a synchronous speed of 16 RPM at 0.5333 Hz (f = RPM × poles / 120 = 16 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 1.675516 rad/s × 0.1 m = 0.1676 m/s (0.6032 km/h). The centripetal acceleration at the rim is ω²·r = 0.2807 m/s².