RPM to Radians Per SecondRPM to rad/s

159 RPM to Radians Per Second Converter

Instant conversion for 159 RPM to rad/s (16.650441 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result16.650441 rad/s
Radians per Second (rad/s)
16.650441
Degrees per Second (°/s)
954 °/s
Hertz (Hz)
2.65 Hz
Revolutions per Second (RPS)
2.65 rev/s
Revolutions per Hour (RPH)
9,540 rev/hr
Revolutions per Day
228,960 rev/day
Radians per Minute (rad/min)
999.02646 rad/min
Milliradians per Second (mrad/s)
16,650.441 mrad/s
Period (seconds per rev)
0.377358 s/rev
Exact Formula
159 × π/30 = 16.650441 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):16.650441 rad/s
Rounded (0.10472):16.650480 rad/s
Angular Error / Hour:8.03° / hr

Worked Conversion: 159 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 159 × (π / 30) = 16.650441 rad/s

Exact fraction: 159π/30 rad/s · Reciprocal: 16.65 rad/s × (30/π) = 159 RPM

Angular Velocity
16.650441 rad/s
Frequency
2.65 Hz
Degrees / Second
954 °/s
Period per Rev
0.3774 s
Engineering Context: A few hundred RPM covers ceiling fans, washing-machine wash cycles and geared conveyor drives — fast enough to feel, slow enough to watch.

Reverse Conversion: 16.65 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

159 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

159 RPM = 53π/10 rad/s ≈ 16.650441 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 16.6473 rad/s instead of the exact 16.6504 rad/s — an error of 0.003141 rad/s.

What this speed looks like in practice

At 159 RPM a shaft turns about 3.53× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.26× faster.

Revolutions over time

That is 9,540 revolutions per hour and 228,960 per day. A quarter turn (90°) takes 94.3 ms, and the shaft sweeps 0.954° every millisecond.

Rim speed and centripetal load at ω = 16.6504 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.1665 m/s · 0.5994 km/h2.772 m/s² · 0.2827 g
5 cm10 cm0.8325 m/s · 2.997 km/h13.86 m/s² · 1.414 g
10 cm20 cm1.665 m/s · 5.994 km/h27.72 m/s² · 2.827 g
25 cm50 cm4.163 m/s · 14.99 km/h69.31 m/s² · 7.068 g
50 cm1 m8.325 m/s · 29.97 km/h138.6 m/s² · 14.14 g
1 m2 m16.65 m/s · 59.94 km/h277.2 m/s² · 28.27 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 159 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
22.65 HzBelow typical VFD range — use a gearbox
45.3 HzReachable with a VFD
67.95 HzReachable with a VFD
810.6 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:153 RPM · 5.55 rad/s×3
5:131.8 RPM · 3.33 rad/s×5
10:115.9 RPM · 1.665 rad/s×10
30:15.3 RPM · 0.555 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.1386 J
0.01 kg·m² (bench-grinder wheel)1.386 J
0.1 kg·m² (car flywheel)13.86 J
1 kg·m² (industrial flywheel)138.6 J

Multiples of this speed

  • 0.5× = 79.5 RPM8.3252 rad/s
  • 2× = 318 RPM33.3009 rad/s
  • 5× = 795 RPM83.2522 rad/s
  • 10× = 1,590 RPM166.5044 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions