170 RPM to Radians Per Second Converter
Instant conversion for 170 RPM to rad/s (17.802358 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 17.802358
- Degrees per Second (°/s)
- 1,020 °/s
- Hertz (Hz)
- 2.833333 Hz
- Revolutions per Second (RPS)
- 2.833333 rev/s
- Revolutions per Hour (RPH)
- 10,200 rev/hr
- Revolutions per Day
- 244,800 rev/day
- Radians per Minute (rad/min)
- 1,068.1415 rad/min
- Milliradians per Second (mrad/s)
- 17,802.358 mrad/s
- Period (seconds per rev)
- 0.352941 s/rev
- Exact Formula
- 170 × π/30 = 17.802358 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 170 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 170 × (π / 30) = 17.802358 rad/s
Exact fraction: 170π/30 rad/s · Reciprocal: 17.802 rad/s × (30/π) = 170 RPM
Reverse Conversion: 17.802 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
170 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
170 RPM = 17π/3 rad/s ≈ 17.802358 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 17.799 rad/s instead of the exact 17.8024 rad/s — an error of 0.003358 rad/s.
What this speed looks like in practice
At 170 RPM a shaft turns about 3.78× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.18× faster.
Revolutions over time
That is 10,200 revolutions per hour and 244,800 per day. A quarter turn (90°) takes 88.2 ms, and the shaft sweeps 1.02° every millisecond.
Rim speed and centripetal load at ω = 17.8024 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.178 m/s · 0.6409 km/h | 3.169 m/s² · 0.3232 g |
| 5 cm | 10 cm | 0.8901 m/s · 3.204 km/h | 15.85 m/s² · 1.616 g |
| 10 cm | 20 cm | 1.78 m/s · 6.409 km/h | 31.69 m/s² · 3.232 g |
| 25 cm | 50 cm | 4.451 m/s · 16.02 km/h | 79.23 m/s² · 8.079 g |
| 50 cm | 1 m | 8.901 m/s · 32.04 km/h | 158.5 m/s² · 16.16 g |
| 1 m | 2 m | 17.8 m/s · 64.09 km/h | 316.9 m/s² · 32.32 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 170 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.833 Hz | Below typical VFD range — use a gearbox |
| 4 | 5.667 Hz | Reachable with a VFD |
| 6 | 8.5 Hz | Reachable with a VFD |
| 8 | 11.33 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 56.67 RPM · 5.934 rad/s | ×3 |
| 5:1 | 34 RPM · 3.56 rad/s | ×5 |
| 10:1 | 17 RPM · 1.78 rad/s | ×10 |
| 30:1 | 5.667 RPM · 0.5934 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.1585 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.585 J |
| 0.1 kg·m² (car flywheel) | 15.85 J |
| 1 kg·m² (industrial flywheel) | 158.5 J |
Multiples of this speed
- 0.5× = 85 RPM8.9012 rad/s
- 2× = 340 RPM35.6047 rad/s
- 5× = 850 RPM89.0118 rad/s
- 10× = 1,700 RPM178.0236 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 170 RPM to radians per second, multiply 170 by π and divide by 30: 170 × (π / 30) = 17.802358 rad/s (approx. 17.802 rad/s).
170 RPM equals 2.8333 Hz (revolutions per second), calculated by dividing 170 by 60 seconds.
To convert 17.802 rad/s back to RPM, multiply by 30 and divide by π: 17.802 × (30 / π) ≈ 170 RPM.
At 170 RPM, one full 360° revolution takes 0.3529 seconds (352.94 ms).
A 4-pole induction motor has a synchronous speed of 170 RPM at 5.6667 Hz (f = RPM × poles / 120 = 170 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 17.802358 rad/s × 0.1 m = 1.7802 m/s (6.4088 km/h). The centripetal acceleration at the rim is ω²·r = 31.6924 m/s².