1,440 RPM to Radians Per Second Converter
Instant conversion for 1,440 RPM to rad/s (150.796447 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 150.79645
- Degrees per Second (°/s)
- 8,640 °/s
- Hertz (Hz)
- 24 Hz
- Revolutions per Second (RPS)
- 24 rev/s
- Revolutions per Hour (RPH)
- 86,400 rev/hr
- Revolutions per Day
- 2,073,600 rev/day
- Radians per Minute (rad/min)
- 9,047.7868 rad/min
- Milliradians per Second (mrad/s)
- 150,796.45 mrad/s
- Period (seconds per rev)
- 0.041667 s/rev
- Exact Formula
- 1440 × π/30 = 150.79645 rad/s
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,440 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1440 × (π / 30) = 150.796447 rad/s
Exact fraction: 1440π/30 rad/s · Reciprocal: 150.8 rad/s × (30/π) = 1,440 RPM
Reverse Conversion: 150.8 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,440 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,440 RPM = 48π rad/s ≈ 150.796447 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 150.768 rad/s instead of the exact 150.7964 rad/s — an error of 0.02845 rad/s.
What this speed looks like in practice
At 1,440 RPM a shaft turns about 1.2× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.25× faster.
Revolutions over time
That is 86,400 revolutions per hour and 2,073,600 per day. A quarter turn (90°) takes 10.4 ms, and the shaft sweeps 8.64° every millisecond.
Rim speed and centripetal load at ω = 150.7964 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.508 m/s · 5.429 km/h | 227.4 m/s² · 23.19 g |
| 5 cm | 10 cm | 7.54 m/s · 27.14 km/h | 1,137 m/s² · 115.9 g |
| 10 cm | 20 cm | 15.08 m/s · 54.29 km/h | 2,274 m/s² · 231.9 g |
| 25 cm | 50 cm | 37.7 m/s · 135.7 km/h | 5,685 m/s² · 579.7 g |
| 50 cm | 1 m | 75.4 m/s · 271.4 km/h | 11,370 m/s² · 1,159 g |
| 1 m | 2 m | 150.8 m/s · 542.9 km/h | 22,740 m/s² · 2,319 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,440 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 24 Hz | Reachable with a VFD |
| 4 | 48 Hz | Reachable with a VFD |
| 6 | 72 Hz | Reachable with a VFD |
| 8 | 96 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 480 RPM · 50.27 rad/s | ×3 |
| 5:1 | 288 RPM · 30.16 rad/s | ×5 |
| 10:1 | 144 RPM · 15.08 rad/s | ×10 |
| 30:1 | 48 RPM · 5.027 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 11.37 J |
| 0.01 kg·m² (bench-grinder wheel) | 113.7 J |
| 0.1 kg·m² (car flywheel) | 1.137 kJ |
| 1 kg·m² (industrial flywheel) | 11.37 kJ |
Multiples of this speed
- 0.5× = 720 RPM75.3982 rad/s
- 2× = 2,880 RPM301.5929 rad/s
- 5× = 7,200 RPM753.9822 rad/s
- 10× = 14,400 RPM1,507.9645 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,440 RPM to radians per second, multiply 1440 by π and divide by 30: 1440 × (π / 30) = 150.796447 rad/s (approx. 150.8 rad/s).
1,440 RPM equals 24.0000 Hz (revolutions per second), calculated by dividing 1440 by 60 seconds.
To convert 150.8 rad/s back to RPM, multiply by 30 and divide by π: 150.8 × (30 / π) ≈ 1,440 RPM.
At 1,440 RPM, one full 360° revolution takes 0.0417 seconds (41.67 ms).
A 4-pole induction motor has a synchronous speed of 1,440 RPM at 48 Hz (f = RPM × poles / 120 = 1440 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 150.796447 rad/s × 0.1 m = 15.0796 m/s (54.2867 km/h). The centripetal acceleration at the rim is ω²·r = 2273.9569 m/s².