1,725 RPM to Radians Per Second Converter
Instant conversion for 1,725 RPM to rad/s (180.641578 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 180.64158
- Degrees per Second (°/s)
- 10,350 °/s
- Hertz (Hz)
- 28.75 Hz
- Revolutions per Second (RPS)
- 28.75 rev/s
- Revolutions per Hour (RPH)
- 103,500 rev/hr
- Revolutions per Day
- 2,484,000 rev/day
- Radians per Minute (rad/min)
- 10,838.495 rad/min
- Milliradians per Second (mrad/s)
- 180,641.58 mrad/s
- Period (seconds per rev)
- 0.034783 s/rev
- Exact Formula
- 1725 × π/30 = 180.64158 rad/s
- Nearest Real-World Example
- Power drill (2,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,725 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1725 × (π / 30) = 180.641578 rad/s
Exact fraction: 1725π/30 rad/s · Reciprocal: 180.64 rad/s × (30/π) = 1,725 RPM
Reverse Conversion: 180.64 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,725 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,725 RPM = 115π/2 rad/s ≈ 180.641578 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 180.6075 rad/s instead of the exact 180.6416 rad/s — an error of 0.03408 rad/s.
What this speed looks like in practice
At 1,725 RPM a shaft turns about 1.44× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.04× faster.
Revolutions over time
That is 103,500 revolutions per hour and 2,484,000 per day. A quarter turn (90°) takes 8.7 ms, and the shaft sweeps 10.35° every millisecond.
Rim speed and centripetal load at ω = 180.6416 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.806 m/s · 6.503 km/h | 326.3 m/s² · 33.27 g |
| 5 cm | 10 cm | 9.032 m/s · 32.52 km/h | 1,632 m/s² · 166.4 g |
| 10 cm | 20 cm | 18.06 m/s · 65.03 km/h | 3,263 m/s² · 332.7 g |
| 25 cm | 50 cm | 45.16 m/s · 162.6 km/h | 8,158 m/s² · 831.9 g |
| 50 cm | 1 m | 90.32 m/s · 325.2 km/h | 16,320 m/s² · 1,664 g |
| 1 m | 2 m | 180.6 m/s · 650.3 km/h | 32,630 m/s² · 3,327 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,725 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 28.75 Hz | Reachable with a VFD |
| 4 | 57.5 Hz | Reachable with a VFD |
| 6 | 86.25 Hz | Reachable with a VFD |
| 8 | 115 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 575 RPM · 60.21 rad/s | ×3 |
| 5:1 | 345 RPM · 36.13 rad/s | ×5 |
| 10:1 | 172.5 RPM · 18.06 rad/s | ×10 |
| 30:1 | 57.5 RPM · 6.021 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 16.32 J |
| 0.01 kg·m² (bench-grinder wheel) | 163.2 J |
| 0.1 kg·m² (car flywheel) | 1.632 kJ |
| 1 kg·m² (industrial flywheel) | 16.32 kJ |
Multiples of this speed
- 0.5× = 862.5 RPM90.3208 rad/s
- 2× = 3,450 RPM361.2832 rad/s
- 5× = 8,625 RPM903.2079 rad/s
- 10× = 17,250 RPM1,806.4158 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,725 RPM to radians per second, multiply 1725 by π and divide by 30: 1725 × (π / 30) = 180.641578 rad/s (approx. 180.64 rad/s).
1,725 RPM equals 28.7500 Hz (revolutions per second), calculated by dividing 1725 by 60 seconds.
To convert 180.64 rad/s back to RPM, multiply by 30 and divide by π: 180.64 × (30 / π) ≈ 1,725 RPM.
At 1,725 RPM, one full 360° revolution takes 0.0348 seconds (34.78 ms).
A 4-pole induction motor has a synchronous speed of 1,725 RPM at 57.5 Hz (f = RPM × poles / 120 = 1725 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 180.641578 rad/s × 0.1 m = 18.0642 m/s (65.031 km/h). The centripetal acceleration at the rim is ω²·r = 3263.138 m/s².