60 Rad/s to RPM Converter
Instant conversion for 60 rad/s to RPM (572.9578 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 572.9578
- Degrees per Second (°/s)
- 3,437.7468 °/s
- Hertz (Hz)
- 9.549297 Hz
- Revolutions per Second (RPS)
- 9.549297 rev/s
- Revolutions per Hour (RPH)
- 34,377.468 rev/hr
- Revolutions per Day
- 825,059.22 rev/day
- Radians per Minute (rad/min)
- 3,600 rad/min
- Milliradians per Second (mrad/s)
- 60,000 mrad/s
- Period (seconds per rev)
- 0.10472 s/rev
- Exact Formula
- 60 × 30/π = 572.9578 RPM
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 60 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 60 × (30 / π) = 572.9578 RPM
Exact fraction: (60 × 30)/π RPM · Reciprocal: 572.96 RPM × (π/30) = 60 rad/s
Forward Conversion: 600 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
60 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
60 rad/s = 1,800/π RPM ≈ 572.957795 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 573 RPM instead of the exact 572.9578 RPM — an error of 0.0422 RPM.
What this speed looks like in practice
At 572.9578 RPM a shaft turns about 2.86× as fast as a ceiling fan on high. A car engine at idle turns about 1.31× faster.
Revolutions over time
That is 34,377 revolutions per hour and 825,060 per day. A quarter turn (90°) takes 26.2 ms, and the shaft sweeps 3.438° every millisecond.
Rim speed and centripetal load at ω = 60 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.6 m/s · 2.16 km/h | 36 m/s² · 3.671 g |
| 5 cm | 10 cm | 3 m/s · 10.8 km/h | 180 m/s² · 18.35 g |
| 10 cm | 20 cm | 6 m/s · 21.6 km/h | 360 m/s² · 36.71 g |
| 25 cm | 50 cm | 15 m/s · 54 km/h | 900 m/s² · 91.77 g |
| 50 cm | 1 m | 30 m/s · 108 km/h | 1,800 m/s² · 183.5 g |
| 1 m | 2 m | 60 m/s · 216 km/h | 3,600 m/s² · 367.1 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 572.96 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 9.549 Hz | Reachable with a VFD |
| 4 | 19.1 Hz | Reachable with a VFD |
| 6 | 28.65 Hz | Reachable with a VFD |
| 8 | 38.2 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 191 RPM · 20 rad/s | ×3 |
| 5:1 | 114.6 RPM · 12 rad/s | ×5 |
| 10:1 | 57.3 RPM · 6 rad/s | ×10 |
| 30:1 | 19.1 RPM · 2 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 1.8 J |
| 0.01 kg·m² (bench-grinder wheel) | 18 J |
| 0.1 kg·m² (car flywheel) | 180 J |
| 1 kg·m² (industrial flywheel) | 1.8 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 60 radians per second to RPM, multiply 60 by 30 and divide by π: 60 × (30 / π) = 572.9578 RPM (approx. 572.96 RPM).
60 rad/s equals 9.5493 Hz (revolutions per second), calculated by dividing 60 by 2π (approx. 6.283185).
To convert 572.96 RPM back to radians per second, multiply by π and divide by 30: 572.96 × (π / 30) ≈ 60 rad/s.
At 60 rad/s, one full 360° revolution takes 0.1047 seconds (104.72 ms).
60 rad/s is 572.9578 RPM, which a 4-pole induction motor reaches synchronously at 19.0986 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 60 rad/s × 0.1 m = 6 m/s (21.6 km/h), with a centripetal acceleration of ω²·r = 360 m/s².