62.832 Rad/s to RPM Converter
Instant conversion for 62.832 rad/s to RPM (600.0004 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 600.00045
- Degrees per Second (°/s)
- 3,600.0027 °/s
- Hertz (Hz)
- 10.000007 Hz
- Revolutions per Second (RPS)
- 10.000007 rev/s
- Revolutions per Hour (RPH)
- 36,000.027 rev/hr
- Revolutions per Day
- 864,000.65 rev/day
- Radians per Minute (rad/min)
- 3,769.914 rad/min
- Milliradians per Second (mrad/s)
- 62,831.9 mrad/s
- Period (seconds per rev)
- 0.1 s/rev
- Exact Formula
- 62.8319 × 30/π = 600.00045 RPM
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 62.832 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 62.8319 × (30 / π) = 600.0004 RPM
Exact fraction: (62.8319 × 30)/π RPM · Reciprocal: 600 RPM × (π/30) = 62.832 rad/s
Forward Conversion: 600 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
62.8319 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
62.8319 rad/s = 1,884.957/π RPM ≈ 600.000448 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 600.0446 RPM instead of the exact 600.0004 RPM — an error of 0.0442 RPM.
What this speed looks like in practice
At 600.0004 RPM a shaft turns about 3× as fast as a ceiling fan on high. A car engine at idle turns about 1.25× faster.
Revolutions over time
That is 36,000 revolutions per hour and 864,000 per day. A quarter turn (90°) takes 25 ms, and the shaft sweeps 3.6° every millisecond.
Rim speed and centripetal load at ω = 62.8319 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.6283 m/s · 2.262 km/h | 39.48 m/s² · 4.026 g |
| 5 cm | 10 cm | 3.142 m/s · 11.31 km/h | 197.4 m/s² · 20.13 g |
| 10 cm | 20 cm | 6.283 m/s · 22.62 km/h | 394.8 m/s² · 40.26 g |
| 25 cm | 50 cm | 15.71 m/s · 56.55 km/h | 987 m/s² · 100.6 g |
| 50 cm | 1 m | 31.42 m/s · 113.1 km/h | 1,974 m/s² · 201.3 g |
| 1 m | 2 m | 62.83 m/s · 226.2 km/h | 3,948 m/s² · 402.6 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 600 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 10 Hz | Reachable with a VFD |
| 4 | 20 Hz | Reachable with a VFD |
| 6 | 30 Hz | Reachable with a VFD |
| 8 | 40 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 200 RPM · 20.94 rad/s | ×3 |
| 5:1 | 120 RPM · 12.57 rad/s | ×5 |
| 10:1 | 60 RPM · 6.283 rad/s | ×10 |
| 30:1 | 20 RPM · 2.094 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 1.974 J |
| 0.01 kg·m² (bench-grinder wheel) | 19.74 J |
| 0.1 kg·m² (car flywheel) | 197.4 J |
| 1 kg·m² (industrial flywheel) | 1.974 kJ |
Multiples of this speed
- 0.5× = 31.416 rad/s300.0002 RPM
- 2× = 125.6638 rad/s1,200.0009 RPM
- 5× = 314.1595 rad/s3,000.0022 RPM
- 10× = 628.319 rad/s6,000.0045 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 62.832 radians per second to RPM, multiply 62.8319 by 30 and divide by π: 62.8319 × (30 / π) = 600.0004 RPM (approx. 600 RPM).
62.832 rad/s equals 10.0000 Hz (revolutions per second), calculated by dividing 62.8319 by 2π (approx. 6.283185).
To convert 600 RPM back to radians per second, multiply by π and divide by 30: 600 × (π / 30) ≈ 62.832 rad/s.
At 62.832 rad/s, one full 360° revolution takes 0.1 seconds (100.00 ms).
62.832 rad/s is 600.0004 RPM, which a 4-pole induction motor reaches synchronously at 20 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 62.8319 rad/s × 0.1 m = 6.2832 m/s (22.6195 km/h), with a centripetal acceleration of ω²·r = 394.7848 m/s².