40 Rad/s to RPM Converter
Instant conversion for 40 rad/s to RPM (381.9719 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 381.97186
- Degrees per Second (°/s)
- 2,291.8312 °/s
- Hertz (Hz)
- 6.366198 Hz
- Revolutions per Second (RPS)
- 6.366198 rev/s
- Revolutions per Hour (RPH)
- 22,918.312 rev/hr
- Revolutions per Day
- 550,039.48 rev/day
- Radians per Minute (rad/min)
- 2,400 rad/min
- Milliradians per Second (mrad/s)
- 40,000 mrad/s
- Period (seconds per rev)
- 0.15708 s/rev
- Exact Formula
- 40 × 30/π = 381.97186 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 40 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 40 × (30 / π) = 381.9719 RPM
Exact fraction: (40 × 30)/π RPM · Reciprocal: 381.97 RPM × (π/30) = 40 rad/s
Forward Conversion: 400 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
40 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
40 rad/s = 1,200/π RPM ≈ 381.971863 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 382 RPM instead of the exact 381.9719 RPM — an error of 0.02814 RPM.
What this speed looks like in practice
At 381.9719 RPM a shaft turns about 1.91× as fast as a ceiling fan on high. A car engine at idle turns about 1.96× faster.
Revolutions over time
That is 22,918 revolutions per hour and 550,040 per day. A quarter turn (90°) takes 39.3 ms, and the shaft sweeps 2.292° every millisecond.
Rim speed and centripetal load at ω = 40 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.4 m/s · 1.44 km/h | 16 m/s² · 1.632 g |
| 5 cm | 10 cm | 2 m/s · 7.2 km/h | 80 m/s² · 8.158 g |
| 10 cm | 20 cm | 4 m/s · 14.4 km/h | 160 m/s² · 16.32 g |
| 25 cm | 50 cm | 10 m/s · 36 km/h | 400 m/s² · 40.79 g |
| 50 cm | 1 m | 20 m/s · 72 km/h | 800 m/s² · 81.58 g |
| 1 m | 2 m | 40 m/s · 144 km/h | 1,600 m/s² · 163.2 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 381.97 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 6.366 Hz | Reachable with a VFD |
| 4 | 12.73 Hz | Reachable with a VFD |
| 6 | 19.1 Hz | Reachable with a VFD |
| 8 | 25.46 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 127.3 RPM · 13.33 rad/s | ×3 |
| 5:1 | 76.39 RPM · 8 rad/s | ×5 |
| 10:1 | 38.2 RPM · 4 rad/s | ×10 |
| 30:1 | 12.73 RPM · 1.333 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.8 J |
| 0.01 kg·m² (bench-grinder wheel) | 8 J |
| 0.1 kg·m² (car flywheel) | 80 J |
| 1 kg·m² (industrial flywheel) | 800 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 40 radians per second to RPM, multiply 40 by 30 and divide by π: 40 × (30 / π) = 381.9719 RPM (approx. 381.97 RPM).
40 rad/s equals 6.3662 Hz (revolutions per second), calculated by dividing 40 by 2π (approx. 6.283185).
To convert 381.97 RPM back to radians per second, multiply by π and divide by 30: 381.97 × (π / 30) ≈ 40 rad/s.
At 40 rad/s, one full 360° revolution takes 0.1571 seconds (157.08 ms).
40 rad/s is 381.9719 RPM, which a 4-pole induction motor reaches synchronously at 12.7324 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 40 rad/s × 0.1 m = 4 m/s (14.4 km/h), with a centripetal acceleration of ω²·r = 160 m/s².