120 Rad/s to RPM Converter
Instant conversion for 120 rad/s to RPM (1145.9156 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 1,145.9156
- Degrees per Second (°/s)
- 6,875.4935 °/s
- Hertz (Hz)
- 19.098593 Hz
- Revolutions per Second (RPS)
- 19.098593 rev/s
- Revolutions per Hour (RPH)
- 68,754.935 rev/hr
- Revolutions per Day
- 1,650,118.4 rev/day
- Radians per Minute (rad/min)
- 7,200 rad/min
- Milliradians per Second (mrad/s)
- 120,000 mrad/s
- Period (seconds per rev)
- 0.05236 s/rev
- Exact Formula
- 120 × 30/π = 1,145.9156 RPM
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 120 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 120 × (30 / π) = 1145.9156 RPM
Exact fraction: (120 × 30)/π RPM · Reciprocal: 1145.9 RPM × (π/30) = 120 rad/s
Forward Conversion: 1,200 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
120 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
120 rad/s = 3,600/π RPM ≈ 1,145.91559 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 1,146 RPM instead of the exact 1,145.9156 RPM — an error of 0.08441 RPM.
What this speed looks like in practice
At 1,145.9156 RPM a shaft turns about 1.53× as fast as a car engine at idle. A washing machine spin cycle turns about 1.05× faster.
Revolutions over time
That is 68,755 revolutions per hour and 1,650,100 per day. A quarter turn (90°) takes 13.1 ms, and the shaft sweeps 6.875° every millisecond.
Rim speed and centripetal load at ω = 120 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.2 m/s · 4.32 km/h | 144 m/s² · 14.68 g |
| 5 cm | 10 cm | 6 m/s · 21.6 km/h | 720 m/s² · 73.42 g |
| 10 cm | 20 cm | 12 m/s · 43.2 km/h | 1,440 m/s² · 146.8 g |
| 25 cm | 50 cm | 30 m/s · 108 km/h | 3,600 m/s² · 367.1 g |
| 50 cm | 1 m | 60 m/s · 216 km/h | 7,200 m/s² · 734.2 g |
| 1 m | 2 m | 120 m/s · 432 km/h | 14,400 m/s² · 1,468 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,145.92 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 19.1 Hz | Reachable with a VFD |
| 4 | 38.2 Hz | Reachable with a VFD |
| 6 | 57.3 Hz | Reachable with a VFD |
| 8 | 76.39 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 382 RPM · 40 rad/s | ×3 |
| 5:1 | 229.2 RPM · 24 rad/s | ×5 |
| 10:1 | 114.6 RPM · 12 rad/s | ×10 |
| 30:1 | 38.2 RPM · 4 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 7.2 J |
| 0.01 kg·m² (bench-grinder wheel) | 72 J |
| 0.1 kg·m² (car flywheel) | 720 J |
| 1 kg·m² (industrial flywheel) | 7.2 kJ |
Multiples of this speed
- 0.5× = 60 rad/s572.9578 RPM
- 2× = 240 rad/s2,291.8312 RPM
- 5× = 600 rad/s5,729.578 RPM
- 10× = 1,200 rad/s11,459.1559 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 120 radians per second to RPM, multiply 120 by 30 and divide by π: 120 × (30 / π) = 1145.9156 RPM (approx. 1145.9 RPM).
120 rad/s equals 19.0986 Hz (revolutions per second), calculated by dividing 120 by 2π (approx. 6.283185).
To convert 1145.9 RPM back to radians per second, multiply by π and divide by 30: 1145.9 × (π / 30) ≈ 120 rad/s.
At 120 rad/s, one full 360° revolution takes 0.0524 seconds (52.36 ms).
120 rad/s is 1145.9156 RPM, which a 4-pole induction motor reaches synchronously at 38.1972 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 120 rad/s × 0.1 m = 12 m/s (43.2 km/h), with a centripetal acceleration of ω²·r = 1440 m/s².