RPM to Radians Per SecondRPM to rad/s

600 Rad/s to RPM Converter

Instant conversion for 600 rad/s to RPM (5729.5780 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result5,729.578 RPM
RPM
5,729.578
Degrees per Second (°/s)
34,377.468 °/s
Hertz (Hz)
95.492966 Hz
Revolutions per Second (RPS)
95.492966 rev/s
Revolutions per Hour (RPH)
343,774.68 rev/hr
Revolutions per Day
8,250,592.2 rev/day
Radians per Minute (rad/min)
36,000 rad/min
Milliradians per Second (mrad/s)
600,000 mrad/s
Period (seconds per rev)
0.010472 s/rev
Exact Formula
600 × 30/π = 5,729.578 RPM
Nearest Real-World Example
Hard drive (5,400 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):600.000000 rad/s
Rounded (0.10472):600.001403 rad/s
Angular Error / Hour:289.40° / hr

Worked Conversion: 600 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 600 × (30 / π) = 5729.5780 RPM

Exact fraction: (600 × 30)/π RPM · Reciprocal: 5729.6 RPM × (π/30) = 600 rad/s

Rotational Speed
5729.5780 RPM
Frequency
95.493 Hz
Degrees / Second
34,377.47 °/s
Period per Rev
0.0105 s
Engineering Context: At 600 rad/s (high-velocity rotational dynamics (5729.6 RPM)), At 600 rad/s, the rotating element turns at 5729.6 RPM (95.5 Hz), requiring precision dynamic balancing and high-speed bearing lubrication.

Forward Conversion: 5,800 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 5,800 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

600 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

600 rad/s = 18,000/π RPM ≈ 5,729.577951 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 5,730 RPM instead of the exact 5,729.578 RPM — an error of 0.422 RPM.

What this speed looks like in practice

At 5,729.578 RPM a shaft turns about 1.06× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.26× faster.

Revolutions over time

That is 343,770 revolutions per hour and 8,250,600 per day. A quarter turn (90°) takes 2.62 ms, and the shaft sweeps 34.38° every millisecond.

Rim speed and centripetal load at ω = 600 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm6 m/s · 21.6 km/h3,600 m/s² · 367.1 g
5 cm10 cm30 m/s · 108 km/h18,000 m/s² · 1,835 g
10 cm20 cm60 m/s · 216 km/h36,000 m/s² · 3,671 g
25 cm50 cm150 m/s · 540 km/h90,000 m/s² · 9,177 g
50 cm1 m300 m/s · 1,080 km/h180,000 m/s² · 18,350 g
1 m2 m600 m/s · 2,160 km/h360,000 m/s² · 36,710 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 5,729.58 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
295.49 HzReachable with a VFD
4191 HzAbove typical VFD range
6286.5 HzAbove typical VFD range
8382 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:11,910 RPM · 200 rad/s×3
5:11,146 RPM · 120 rad/s×5
10:1573 RPM · 60 rad/s×10
30:1191 RPM · 20 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)180 J
0.01 kg·m² (bench-grinder wheel)1.8 kJ
0.1 kg·m² (car flywheel)18 kJ
1 kg·m² (industrial flywheel)180 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions