RPM to Radians Per SecondRPM to rad/s

30 Rad/s to RPM Converter

Instant conversion for 30 rad/s to RPM (286.4789 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result286.4789 RPM
RPM
286.4789
Degrees per Second (°/s)
1,718.8734 °/s
Hertz (Hz)
4.774648 Hz
Revolutions per Second (RPS)
4.774648 rev/s
Revolutions per Hour (RPH)
17,188.734 rev/hr
Revolutions per Day
412,529.61 rev/day
Radians per Minute (rad/min)
1,800 rad/min
Milliradians per Second (mrad/s)
30,000 mrad/s
Period (seconds per rev)
0.20944 s/rev
Exact Formula
30 × 30/π = 286.4789 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):30.000000 rad/s
Rounded (0.10472):30.000070 rad/s
Angular Error / Hour:14.47° / hr

Worked Conversion: 30 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 30 × (30 / π) = 286.4789 RPM

Exact fraction: (30 × 30)/π RPM · Reciprocal: 286.48 RPM × (π/30) = 30 rad/s

Rotational Speed
286.4789 RPM
Frequency
4.7746 Hz
Degrees / Second
1,718.87 °/s
Period per Rev
0.2094 s
Engineering Context: At 30 rad/s (moderate machinery speed (286.48 RPM)), At 30 rad/s, the rotor spins at 286.48 RPM (4.77 Hz), commonly encountered in gearboxes and machine tool spindles.

Forward Conversion: 300 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 300 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

30 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

30 rad/s = 900/π RPM ≈ 286.478898 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 286.5 RPM instead of the exact 286.4789 RPM — an error of 0.0211 RPM.

What this speed looks like in practice

At 286.4789 RPM a shaft turns about 1.43× as fast as a ceiling fan on high. A car engine at idle turns about 2.62× faster.

Revolutions over time

That is 17,189 revolutions per hour and 412,530 per day. A quarter turn (90°) takes 52.4 ms, and the shaft sweeps 1.719° every millisecond.

Rim speed and centripetal load at ω = 30 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.3 m/s · 1.08 km/h9 m/s² · 0.9177 g
5 cm10 cm1.5 m/s · 5.4 km/h45 m/s² · 4.589 g
10 cm20 cm3 m/s · 10.8 km/h90 m/s² · 9.177 g
25 cm50 cm7.5 m/s · 27 km/h225 m/s² · 22.94 g
50 cm1 m15 m/s · 54 km/h450 m/s² · 45.89 g
1 m2 m30 m/s · 108 km/h900 m/s² · 91.77 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 286.48 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
24.775 HzBelow typical VFD range — use a gearbox
49.549 HzReachable with a VFD
614.32 HzReachable with a VFD
819.1 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:195.49 RPM · 10 rad/s×3
5:157.3 RPM · 6 rad/s×5
10:128.65 RPM · 3 rad/s×10
30:19.549 RPM · 1 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.45 J
0.01 kg·m² (bench-grinder wheel)4.5 J
0.1 kg·m² (car flywheel)45 J
1 kg·m² (industrial flywheel)450 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions