300 Rad/s to RPM Converter
Instant conversion for 300 rad/s to RPM (2864.7890 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 2,864.789
- Degrees per Second (°/s)
- 17,188.734 °/s
- Hertz (Hz)
- 47.746483 Hz
- Revolutions per Second (RPS)
- 47.746483 rev/s
- Revolutions per Hour (RPH)
- 171,887.34 rev/hr
- Revolutions per Day
- 4,125,296.1 rev/day
- Radians per Minute (rad/min)
- 18,000 rad/min
- Milliradians per Second (mrad/s)
- 300,000 mrad/s
- Period (seconds per rev)
- 0.020944 s/rev
- Exact Formula
- 300 × 30/π = 2,864.789 RPM
- Nearest Real-World Example
- Car engine — highway (2,500 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 300 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 300 × (30 / π) = 2864.7890 RPM
Exact fraction: (300 × 30)/π RPM · Reciprocal: 2864.8 RPM × (π/30) = 300 rad/s
Forward Conversion: 2,850 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
300 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
300 rad/s = 9,000/π RPM ≈ 2,864.788976 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 2,865 RPM instead of the exact 2,864.789 RPM — an error of 0.211 RPM.
What this speed looks like in practice
At 2,864.789 RPM a shaft turns about 1.59× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.88× faster.
Revolutions over time
That is 171,890 revolutions per hour and 4,125,300 per day. A quarter turn (90°) takes 5.24 ms, and the shaft sweeps 17.19° every millisecond.
Rim speed and centripetal load at ω = 300 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 3 m/s · 10.8 km/h | 900 m/s² · 91.77 g |
| 5 cm | 10 cm | 15 m/s · 54 km/h | 4,500 m/s² · 458.9 g |
| 10 cm | 20 cm | 30 m/s · 108 km/h | 9,000 m/s² · 917.7 g |
| 25 cm | 50 cm | 75 m/s · 270 km/h | 22,500 m/s² · 2,294 g |
| 50 cm | 1 m | 150 m/s · 540 km/h | 45,000 m/s² · 4,589 g |
| 1 m | 2 m | 300 m/s · 1,080 km/h | 90,000 m/s² · 9,177 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 2,864.79 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 47.75 Hz | Reachable with a VFD |
| 4 | 95.49 Hz | Reachable with a VFD |
| 6 | 143.2 Hz | Above typical VFD range |
| 8 | 191 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 954.9 RPM · 100 rad/s | ×3 |
| 5:1 | 573 RPM · 60 rad/s | ×5 |
| 10:1 | 286.5 RPM · 30 rad/s | ×10 |
| 30:1 | 95.49 RPM · 10 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 45 J |
| 0.01 kg·m² (bench-grinder wheel) | 450 J |
| 0.1 kg·m² (car flywheel) | 4.5 kJ |
| 1 kg·m² (industrial flywheel) | 45 kJ |
Multiples of this speed
- 0.5× = 150 rad/s1,432.3945 RPM
- 2× = 600 rad/s5,729.578 RPM
- 5× = 1,500 rad/s14,323.9449 RPM
- 10× = 3,000 rad/s28,647.8898 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 300 radians per second to RPM, multiply 300 by 30 and divide by π: 300 × (30 / π) = 2864.7890 RPM (approx. 2864.8 RPM).
300 rad/s equals 47.7465 Hz (revolutions per second), calculated by dividing 300 by 2π (approx. 6.283185).
To convert 2864.8 RPM back to radians per second, multiply by π and divide by 30: 2864.8 × (π / 30) ≈ 300 rad/s.
At 300 rad/s, one full 360° revolution takes 0.0209 seconds (20.94 ms).
300 rad/s is 2864.7890 RPM, which a 4-pole induction motor reaches synchronously at 95.493 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 300 rad/s × 0.1 m = 30 m/s (108 km/h), with a centripetal acceleration of ω²·r = 9000 m/s².