RPM to Radians Per SecondRPM to rad/s

200 Rad/s to RPM Converter

Instant conversion for 200 rad/s to RPM (1909.8593 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result1,909.8593 RPM
RPM
1,909.8593
Degrees per Second (°/s)
11,459.156 °/s
Hertz (Hz)
31.830989 Hz
Revolutions per Second (RPS)
31.830989 rev/s
Revolutions per Hour (RPH)
114,591.56 rev/hr
Revolutions per Day
2,750,197.4 rev/day
Radians per Minute (rad/min)
12,000 rad/min
Milliradians per Second (mrad/s)
200,000 mrad/s
Period (seconds per rev)
0.031416 s/rev
Exact Formula
200 × 30/π = 1,909.8593 RPM
Nearest Real-World Example
Power drill (2,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):200.000000 rad/s
Rounded (0.10472):200.000468 rad/s
Angular Error / Hour:96.47° / hr

Worked Conversion: 200 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 200 × (30 / π) = 1909.8593 RPM

Exact fraction: (200 × 30)/π RPM · Reciprocal: 1909.9 RPM × (π/30) = 200 rad/s

Rotational Speed
1909.8593 RPM
Frequency
31.831 Hz
Degrees / Second
11,459.16 °/s
Period per Rev
0.0314 s
Engineering Context: At 200 rad/s (industrial electric motor speed (1909.9 RPM)), Operating at 200 rad/s translates to 1909.9 RPM (31.8 Hz), characteristic of multi-pole AC induction motors and centrifugal pumps.

Forward Conversion: 2,000 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 2,000 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

200 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

200 rad/s = 6,000/π RPM ≈ 1,909.859317 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 1,910 RPM instead of the exact 1,909.8593 RPM — an error of 0.1407 RPM.

What this speed looks like in practice

At 1,909.8593 RPM a shaft turns about 1.06× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 2.83× faster.

Revolutions over time

That is 114,590 revolutions per hour and 2,750,200 per day. A quarter turn (90°) takes 7.85 ms, and the shaft sweeps 11.46° every millisecond.

Rim speed and centripetal load at ω = 200 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm2 m/s · 7.2 km/h400 m/s² · 40.79 g
5 cm10 cm10 m/s · 36 km/h2,000 m/s² · 203.9 g
10 cm20 cm20 m/s · 72 km/h4,000 m/s² · 407.9 g
25 cm50 cm50 m/s · 180 km/h10,000 m/s² · 1,020 g
50 cm1 m100 m/s · 360 km/h20,000 m/s² · 2,039 g
1 m2 m200 m/s · 720 km/h40,000 m/s² · 4,079 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,909.86 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
231.83 HzReachable with a VFD
463.66 HzReachable with a VFD
695.49 HzReachable with a VFD
8127.3 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1636.6 RPM · 66.67 rad/s×3
5:1382 RPM · 40 rad/s×5
10:1191 RPM · 20 rad/s×10
30:163.66 RPM · 6.667 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)20 J
0.01 kg·m² (bench-grinder wheel)200 J
0.1 kg·m² (car flywheel)2 kJ
1 kg·m² (industrial flywheel)20 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions