RPM to Radians Per SecondRPM to rad/s

2,000 RPM to Radians Per Second Converter

Instant conversion for 2,000 RPM to rad/s (209.439510 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result209.439510 rad/s
Radians per Second (rad/s)
209.43951
Degrees per Second (°/s)
12,000 °/s
Hertz (Hz)
33.333333 Hz
Revolutions per Second (RPS)
33.333333 rev/s
Revolutions per Hour (RPH)
120,000 rev/hr
Revolutions per Day
2,880,000 rev/day
Radians per Minute (rad/min)
12,566.371 rad/min
Milliradians per Second (mrad/s)
209,439.51 mrad/s
Period (seconds per rev)
0.03 s/rev
Exact Formula
2000 × π/30 = 209.43951 rad/s
Nearest Real-World Example
Power drill (2,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):209.439510 rad/s
Rounded (0.10472):209.440000 rad/s
Angular Error / Hour:101.02° / hr

Worked Conversion: 2,000 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 2000 × (π / 30) = 209.439510 rad/s

Exact fraction: 2000π/30 rad/s · Reciprocal: 209.44 rad/s × (30/π) = 2,000 RPM

Angular Velocity
209.439510 rad/s
Frequency
33.3333 Hz
Degrees / Second
12,000 °/s
Period per Rev
0.03 s
Engineering Context: Around 2,000 RPM is where hand power tools live — fast enough that angular velocity dominates the torque budget, slow enough to stay controllable.

Reverse Conversion: 209.44 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

2,000 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

2,000 RPM = 200π/3 rad/s ≈ 209.43951 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 209.4 rad/s instead of the exact 209.4395 rad/s — an error of 0.03951 rad/s.

What this speed looks like in practice

At 2,000 RPM a shaft turns about 1.11× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 2.7× faster.

Revolutions over time

That is 120,000 revolutions per hour and 2,880,000 per day. A quarter turn (90°) takes 7.5 ms, and the shaft sweeps 12° every millisecond.

Rim speed and centripetal load at ω = 209.4395 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm2.094 m/s · 7.54 km/h438.6 m/s² · 44.73 g
5 cm10 cm10.47 m/s · 37.7 km/h2,193 m/s² · 223.6 g
10 cm20 cm20.94 m/s · 75.4 km/h4,386 m/s² · 447.3 g
25 cm50 cm52.36 m/s · 188.5 km/h10,970 m/s² · 1,118 g
50 cm1 m104.7 m/s · 377 km/h21,930 m/s² · 2,236 g
1 m2 m209.4 m/s · 754 km/h43,860 m/s² · 4,473 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 2,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
233.33 HzReachable with a VFD
466.67 HzReachable with a VFD
6100 HzReachable with a VFD
8133.3 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1666.7 RPM · 69.81 rad/s×3
5:1400 RPM · 41.89 rad/s×5
10:1200 RPM · 20.94 rad/s×10
30:166.67 RPM · 6.981 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)21.93 J
0.01 kg·m² (bench-grinder wheel)219.3 J
0.1 kg·m² (car flywheel)2.193 kJ
1 kg·m² (industrial flywheel)21.93 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions