180 Rad/s to RPM Converter
Instant conversion for 180 rad/s to RPM (1718.8734 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 1,718.8734
- Degrees per Second (°/s)
- 10,313.24 °/s
- Hertz (Hz)
- 28.64789 Hz
- Revolutions per Second (RPS)
- 28.64789 rev/s
- Revolutions per Hour (RPH)
- 103,132.4 rev/hr
- Revolutions per Day
- 2,475,177.7 rev/day
- Radians per Minute (rad/min)
- 10,800 rad/min
- Milliradians per Second (mrad/s)
- 180,000 mrad/s
- Period (seconds per rev)
- 0.034907 s/rev
- Exact Formula
- 180 × 30/π = 1,718.8734 RPM
- Nearest Real-World Example
- Power drill (2,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 180 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 180 × (30 / π) = 1718.8734 RPM
Exact fraction: (180 × 30)/π RPM · Reciprocal: 1718.9 RPM × (π/30) = 180 rad/s
Forward Conversion: 1,725 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
180 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
180 rad/s = 5,400/π RPM ≈ 1,718.873385 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 1,719 RPM instead of the exact 1,718.8734 RPM — an error of 0.1266 RPM.
What this speed looks like in practice
At 1,718.8734 RPM a shaft turns about 1.43× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.05× faster.
Revolutions over time
That is 103,130 revolutions per hour and 2,475,200 per day. A quarter turn (90°) takes 8.73 ms, and the shaft sweeps 10.31° every millisecond.
Rim speed and centripetal load at ω = 180 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.8 m/s · 6.48 km/h | 324 m/s² · 33.04 g |
| 5 cm | 10 cm | 9 m/s · 32.4 km/h | 1,620 m/s² · 165.2 g |
| 10 cm | 20 cm | 18 m/s · 64.8 km/h | 3,240 m/s² · 330.4 g |
| 25 cm | 50 cm | 45 m/s · 162 km/h | 8,100 m/s² · 826 g |
| 50 cm | 1 m | 90 m/s · 324 km/h | 16,200 m/s² · 1,652 g |
| 1 m | 2 m | 180 m/s · 648 km/h | 32,400 m/s² · 3,304 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,718.87 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 28.65 Hz | Reachable with a VFD |
| 4 | 57.3 Hz | Reachable with a VFD |
| 6 | 85.94 Hz | Reachable with a VFD |
| 8 | 114.6 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 573 RPM · 60 rad/s | ×3 |
| 5:1 | 343.8 RPM · 36 rad/s | ×5 |
| 10:1 | 171.9 RPM · 18 rad/s | ×10 |
| 30:1 | 57.3 RPM · 6 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 16.2 J |
| 0.01 kg·m² (bench-grinder wheel) | 162 J |
| 0.1 kg·m² (car flywheel) | 1.62 kJ |
| 1 kg·m² (industrial flywheel) | 16.2 kJ |
Multiples of this speed
- 0.5× = 90 rad/s859.4367 RPM
- 2× = 360 rad/s3,437.7468 RPM
- 5× = 900 rad/s8,594.3669 RPM
- 10× = 1,800 rad/s17,188.7339 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 180 radians per second to RPM, multiply 180 by 30 and divide by π: 180 × (30 / π) = 1718.8734 RPM (approx. 1718.9 RPM).
180 rad/s equals 28.6479 Hz (revolutions per second), calculated by dividing 180 by 2π (approx. 6.283185).
To convert 1718.9 RPM back to radians per second, multiply by π and divide by 30: 1718.9 × (π / 30) ≈ 180 rad/s.
At 180 rad/s, one full 360° revolution takes 0.0349 seconds (34.91 ms).
180 rad/s is 1718.8734 RPM, which a 4-pole induction motor reaches synchronously at 57.2958 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 180 rad/s × 0.1 m = 18 m/s (64.8 km/h), with a centripetal acceleration of ω²·r = 3240 m/s².