150 Rad/s to RPM Converter
Instant conversion for 150 rad/s to RPM (1432.3945 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 1,432.3945
- Degrees per Second (°/s)
- 8,594.3669 °/s
- Hertz (Hz)
- 23.873241 Hz
- Revolutions per Second (RPS)
- 23.873241 rev/s
- Revolutions per Hour (RPH)
- 85,943.669 rev/hr
- Revolutions per Day
- 2,062,648.1 rev/day
- Radians per Minute (rad/min)
- 9,000 rad/min
- Milliradians per Second (mrad/s)
- 150,000 mrad/s
- Period (seconds per rev)
- 0.041888 s/rev
- Exact Formula
- 150 × 30/π = 1,432.3945 RPM
- Nearest Real-World Example
- Washing machine spin (1,200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 150 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 150 × (30 / π) = 1432.3945 RPM
Exact fraction: (150 × 30)/π RPM · Reciprocal: 1432.4 RPM × (π/30) = 150 rad/s
Forward Conversion: 1,440 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
150 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
150 rad/s = 4,500/π RPM ≈ 1,432.394488 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 1,432.5 RPM instead of the exact 1,432.3945 RPM — an error of 0.1055 RPM.
What this speed looks like in practice
At 1,432.3945 RPM a shaft turns about 1.19× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.26× faster.
Revolutions over time
That is 85,944 revolutions per hour and 2,062,600 per day. A quarter turn (90°) takes 10.5 ms, and the shaft sweeps 8.594° every millisecond.
Rim speed and centripetal load at ω = 150 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.5 m/s · 5.4 km/h | 225 m/s² · 22.94 g |
| 5 cm | 10 cm | 7.5 m/s · 27 km/h | 1,125 m/s² · 114.7 g |
| 10 cm | 20 cm | 15 m/s · 54 km/h | 2,250 m/s² · 229.4 g |
| 25 cm | 50 cm | 37.5 m/s · 135 km/h | 5,625 m/s² · 573.6 g |
| 50 cm | 1 m | 75 m/s · 270 km/h | 11,250 m/s² · 1,147 g |
| 1 m | 2 m | 150 m/s · 540 km/h | 22,500 m/s² · 2,294 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,432.39 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 23.87 Hz | Reachable with a VFD |
| 4 | 47.75 Hz | Reachable with a VFD |
| 6 | 71.62 Hz | Reachable with a VFD |
| 8 | 95.49 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 477.5 RPM · 50 rad/s | ×3 |
| 5:1 | 286.5 RPM · 30 rad/s | ×5 |
| 10:1 | 143.2 RPM · 15 rad/s | ×10 |
| 30:1 | 47.75 RPM · 5 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 11.25 J |
| 0.01 kg·m² (bench-grinder wheel) | 112.5 J |
| 0.1 kg·m² (car flywheel) | 1.125 kJ |
| 1 kg·m² (industrial flywheel) | 11.25 kJ |
Multiples of this speed
- 0.5× = 75 rad/s716.1972 RPM
- 2× = 300 rad/s2,864.789 RPM
- 5× = 750 rad/s7,161.9724 RPM
- 10× = 1,500 rad/s14,323.9449 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 150 radians per second to RPM, multiply 150 by 30 and divide by π: 150 × (30 / π) = 1432.3945 RPM (approx. 1432.4 RPM).
150 rad/s equals 23.8732 Hz (revolutions per second), calculated by dividing 150 by 2π (approx. 6.283185).
To convert 1432.4 RPM back to radians per second, multiply by π and divide by 30: 1432.4 × (π / 30) ≈ 150 rad/s.
At 150 rad/s, one full 360° revolution takes 0.0419 seconds (41.89 ms).
150 rad/s is 1432.3945 RPM, which a 4-pole induction motor reaches synchronously at 47.7465 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 150 rad/s × 0.1 m = 15 m/s (54 km/h), with a centripetal acceleration of ω²·r = 2250 m/s².