100 Rad/s to RPM Converter
Instant conversion for 100 rad/s to RPM (954.9297 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 954.92966
- Degrees per Second (°/s)
- 5,729.578 °/s
- Hertz (Hz)
- 15.915494 Hz
- Revolutions per Second (RPS)
- 15.915494 rev/s
- Revolutions per Hour (RPH)
- 57,295.78 rev/hr
- Revolutions per Day
- 1,375,098.7 rev/day
- Radians per Minute (rad/min)
- 6,000 rad/min
- Milliradians per Second (mrad/s)
- 100,000 mrad/s
- Period (seconds per rev)
- 0.062832 s/rev
- Exact Formula
- 100 × 30/π = 954.92966 RPM
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 100 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 100 × (30 / π) = 954.9297 RPM
Exact fraction: (100 × 30)/π RPM · Reciprocal: 954.93 RPM × (π/30) = 100 rad/s
Forward Conversion: 1,000 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
100 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
100 rad/s = 3,000/π RPM ≈ 954.929659 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 955 RPM instead of the exact 954.9297 RPM — an error of 0.07034 RPM.
What this speed looks like in practice
At 954.9297 RPM a shaft turns about 1.27× as fast as a car engine at idle. A washing machine spin cycle turns about 1.26× faster.
Revolutions over time
That is 57,296 revolutions per hour and 1,375,100 per day. A quarter turn (90°) takes 15.7 ms, and the shaft sweeps 5.73° every millisecond.
Rim speed and centripetal load at ω = 100 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1 m/s · 3.6 km/h | 100 m/s² · 10.2 g |
| 5 cm | 10 cm | 5 m/s · 18 km/h | 500 m/s² · 50.99 g |
| 10 cm | 20 cm | 10 m/s · 36 km/h | 1,000 m/s² · 102 g |
| 25 cm | 50 cm | 25 m/s · 90 km/h | 2,500 m/s² · 254.9 g |
| 50 cm | 1 m | 50 m/s · 180 km/h | 5,000 m/s² · 509.9 g |
| 1 m | 2 m | 100 m/s · 360 km/h | 10,000 m/s² · 1,020 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 954.93 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 15.92 Hz | Reachable with a VFD |
| 4 | 31.83 Hz | Reachable with a VFD |
| 6 | 47.75 Hz | Reachable with a VFD |
| 8 | 63.66 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 318.3 RPM · 33.33 rad/s | ×3 |
| 5:1 | 191 RPM · 20 rad/s | ×5 |
| 10:1 | 95.49 RPM · 10 rad/s | ×10 |
| 30:1 | 31.83 RPM · 3.333 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 5 J |
| 0.01 kg·m² (bench-grinder wheel) | 50 J |
| 0.1 kg·m² (car flywheel) | 500 J |
| 1 kg·m² (industrial flywheel) | 5 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 100 radians per second to RPM, multiply 100 by 30 and divide by π: 100 × (30 / π) = 954.9297 RPM (approx. 954.93 RPM).
100 rad/s equals 15.9155 Hz (revolutions per second), calculated by dividing 100 by 2π (approx. 6.283185).
To convert 954.93 RPM back to radians per second, multiply by π and divide by 30: 954.93 × (π / 30) ≈ 100 rad/s.
At 100 rad/s, one full 360° revolution takes 0.0628 seconds (62.83 ms).
100 rad/s is 954.9297 RPM, which a 4-pole induction motor reaches synchronously at 31.831 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 100 rad/s × 0.1 m = 10 m/s (36 km/h), with a centripetal acceleration of ω²·r = 1000 m/s².