RPM to Radians Per SecondRPM to rad/s

1,000 Rad/s to RPM Converter

Instant conversion for 1,000 rad/s to RPM (9549.2966 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result9,549.2966 RPM
RPM
9,549.2966
Degrees per Second (°/s)
57,295.78 °/s
Hertz (Hz)
159.15494 Hz
Revolutions per Second (RPS)
159.15494 rev/s
Revolutions per Hour (RPH)
572,957.8 rev/hr
Revolutions per Day
13,750,987 rev/day
Radians per Minute (rad/min)
60,000 rad/min
Milliradians per Second (mrad/s)
1,000,000 mrad/s
Period (seconds per rev)
0.006283 s/rev
Exact Formula
1000 × 30/π = 9,549.2966 RPM
Nearest Real-World Example
Angle grinder (11,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1,000.000000 rad/s
Rounded (0.10472):1,000.002338 rad/s
Angular Error / Hour:482.34° / hr

Worked Conversion: 1,000 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 1000 × (30 / π) = 9549.2966 RPM

Exact fraction: (1000 × 30)/π RPM · Reciprocal: 9549.3 RPM × (π/30) = 1,000 rad/s

Rotational Speed
9549.2966 RPM
Frequency
159.1549 Hz
Degrees / Second
57,295.78 °/s
Period per Rev
0.0063 s
Engineering Context: At 1,000 rad/s (high-velocity rotational dynamics (9549.3 RPM)), At 1000 rad/s, the rotating element turns at 9549.3 RPM (159.2 Hz), requiring precision dynamic balancing and high-speed bearing lubrication.

Forward Conversion: 10,000 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 10,000 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

1,000 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,000 rad/s = 30,000/π RPM ≈ 9,549.296586 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 9,550 RPM instead of the exact 9,549.2966 RPM — an error of 0.7034 RPM.

What this speed looks like in practice

At 9,549.2966 RPM a shaft turns about 1.33× as fast as a desktop hard drive (7,200 RPM). A 115 mm angle grinder turns about 1.15× faster.

Revolutions over time

That is 572,960 revolutions per hour and 13,751,000 per day. A quarter turn (90°) takes 1.57 ms, and the shaft sweeps 57.3° every millisecond.

Rim speed and centripetal load at ω = 1,000 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm10 m/s · 36 km/h10,000 m/s² · 1,020 g
5 cm10 cm50 m/s · 180 km/h50,000 m/s² · 5,099 g
10 cm20 cm100 m/s · 360 km/h100,000 m/s² · 10,200 g
25 cm50 cm250 m/s · 900 km/h250,000 m/s² · 25,490 g
50 cm1 m500 m/s · 1,800 km/h500,000 m/s² · 50,990 g
1 m2 m1,000 m/s · 3,600 km/h1,000,000 m/s² · 102,000 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 9,549.3 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
2159.2 HzAbove typical VFD range
4318.3 HzAbove typical VFD range
6477.5 HzAbove typical VFD range
8636.6 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:13,183 RPM · 333.3 rad/s×3
5:11,910 RPM · 200 rad/s×5
10:1954.9 RPM · 100 rad/s×10
30:1318.3 RPM · 33.33 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)500 J
0.01 kg·m² (bench-grinder wheel)5 kJ
0.1 kg·m² (car flywheel)50 kJ
1 kg·m² (industrial flywheel)500 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions