RPM to Radians Per SecondRPM to rad/s

14,000 RPM to Radians Per Second Converter

Instant conversion for 14,000 RPM to rad/s (1466.076572 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result1466.076572 rad/s
Radians per Second (rad/s)
1466.0766
Degrees per Second (°/s)
84,000 °/s
Hertz (Hz)
233.33333 Hz
Revolutions per Second (RPS)
233.33333 rev/s
Revolutions per Hour (RPH)
840,000 rev/hr
Revolutions per Day
20,160,000 rev/day
Radians per Minute (rad/min)
87,964.594 rad/min
Milliradians per Second (mrad/s)
1,466,076.6 mrad/s
Period (seconds per rev)
0.004286 s/rev
Exact Formula
14000 × π/30 = 1466.0766 rad/s
Nearest Real-World Example
Jet engine — cruise (15,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):1,466.076572 rad/s
Rounded (0.10472):1,466.080000 rad/s
Angular Error / Hour:707.14° / hr

Worked Conversion: 14,000 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 14000 × (π / 30) = 1466.076572 rad/s

Exact fraction: 14000π/30 rad/s · Reciprocal: 1466.1 rad/s × (30/π) = 14,000 RPM

Angular Velocity
1466.076572 rad/s
Frequency
233.3333 Hz
Degrees / Second
84,000 °/s
Period per Rev
0.0043 s
Engineering Context: Above ten thousand RPM you are in grinder, router-spindle and turbomachinery territory, where working in rad/s is not optional — every stress and gyroscopic term assumes SI units.

Reverse Conversion: 1466.1 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

14,000 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

14,000 RPM = 1,400π/3 rad/s ≈ 1,466.076572 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 1,465.8 rad/s instead of the exact 1,466.0766 rad/s — an error of 0.2766 rad/s.

What this speed looks like in practice

At 14,000 RPM a shaft turns about 1.27× as fast as a 115 mm angle grinder. A rotary multi-tool at full speed turns about 2.5× faster.

Revolutions over time

That is 840,000 revolutions per hour and 20,160,000 per day. A quarter turn (90°) takes 1.07 ms, and the shaft sweeps 84° every millisecond.

Rim speed and centripetal load at ω = 1,466.0766 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm14.66 m/s · 52.78 km/h21,490 m/s² · 2,192 g
5 cm10 cm73.3 m/s · 263.9 km/h107,500 m/s² · 10,960 g
10 cm20 cm146.6 m/s · 527.8 km/h214,900 m/s² · 21,920 g
25 cm50 cm366.5 m/s · 1,319 km/h537,300 m/s² · 54,790 g
50 cm1 m733 m/s · 2,639 km/h1,075,000 m/s² · 109,600 g
1 m2 m1,466 m/s · 5,278 km/h2,149,000 m/s² · 219,200 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 14,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
2233.3 HzAbove typical VFD range
4466.7 HzAbove typical VFD range
6700 HzAbove typical VFD range
8933.3 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:14,667 RPM · 488.7 rad/s×3
5:12,800 RPM · 293.2 rad/s×5
10:11,400 RPM · 146.6 rad/s×10
30:1466.7 RPM · 48.87 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)1.075 kJ
0.01 kg·m² (bench-grinder wheel)10.75 kJ
0.1 kg·m² (car flywheel)107.5 kJ
1 kg·m² (industrial flywheel)1.075 MJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions