6,000 RPM to Radians Per Second Converter
Instant conversion for 6,000 RPM to rad/s (628.318531 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 628.31853
- Degrees per Second (°/s)
- 36,000 °/s
- Hertz (Hz)
- 100 Hz
- Revolutions per Second (RPS)
- 100 rev/s
- Revolutions per Hour (RPH)
- 360,000 rev/hr
- Revolutions per Day
- 8,640,000 rev/day
- Radians per Minute (rad/min)
- 37,699.112 rad/min
- Milliradians per Second (mrad/s)
- 628,318.53 mrad/s
- Period (seconds per rev)
- 0.01 s/rev
- Exact Formula
- 6000 × π/30 = 628.31853 rad/s
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 6,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 6000 × (π / 30) = 628.318531 rad/s
Exact fraction: 6000π/30 rad/s · Reciprocal: 628.32 rad/s × (30/π) = 6,000 RPM
Reverse Conversion: 628.32 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
6,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
6,000 RPM = 200π rad/s ≈ 628.318531 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 628.2 rad/s instead of the exact 628.3185 rad/s — an error of 0.1185 rad/s.
What this speed looks like in practice
At 6,000 RPM a shaft turns about 1.11× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.2× faster.
Revolutions over time
That is 360,000 revolutions per hour and 8,640,000 per day. A quarter turn (90°) takes 2.5 ms, and the shaft sweeps 36° every millisecond.
Rim speed and centripetal load at ω = 628.3185 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 6.283 m/s · 22.62 km/h | 3,948 m/s² · 402.6 g |
| 5 cm | 10 cm | 31.42 m/s · 113.1 km/h | 19,740 m/s² · 2,013 g |
| 10 cm | 20 cm | 62.83 m/s · 226.2 km/h | 39,480 m/s² · 4,026 g |
| 25 cm | 50 cm | 157.1 m/s · 565.5 km/h | 98,700 m/s² · 10,060 g |
| 50 cm | 1 m | 314.2 m/s · 1,131 km/h | 197,400 m/s² · 20,130 g |
| 1 m | 2 m | 628.3 m/s · 2,262 km/h | 394,800 m/s² · 40,260 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 6,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 100 Hz | Reachable with a VFD |
| 4 | 200 Hz | Above typical VFD range |
| 6 | 300 Hz | Above typical VFD range |
| 8 | 400 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 2,000 RPM · 209.4 rad/s | ×3 |
| 5:1 | 1,200 RPM · 125.7 rad/s | ×5 |
| 10:1 | 600 RPM · 62.83 rad/s | ×10 |
| 30:1 | 200 RPM · 20.94 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 197.4 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.974 kJ |
| 0.1 kg·m² (car flywheel) | 19.74 kJ |
| 1 kg·m² (industrial flywheel) | 197.4 kJ |
Multiples of this speed
- 0.5× = 3,000 RPM314.1593 rad/s
- 2× = 12,000 RPM1,256.6371 rad/s
- 5× = 30,000 RPM3,141.5927 rad/s
- 10× = 60,000 RPM6,283.1853 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 6,000 RPM to radians per second, multiply 6000 by π and divide by 30: 6000 × (π / 30) = 628.318531 rad/s (approx. 628.32 rad/s).
6,000 RPM equals 100.0000 Hz (revolutions per second), calculated by dividing 6000 by 60 seconds.
To convert 628.32 rad/s back to RPM, multiply by 30 and divide by π: 628.32 × (30 / π) ≈ 6,000 RPM.
At 6,000 RPM, one full 360° revolution takes 0.01 seconds (10.00 ms).
A 4-pole induction motor has a synchronous speed of 6,000 RPM at 200 Hz (f = RPM × poles / 120 = 6000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 628.318531 rad/s × 0.1 m = 62.8319 m/s (226.1947 km/h). The centripetal acceleration at the rim is ω²·r = 39478.4176 m/s².