RPM to Radians Per SecondRPM to rad/s

850 RPM to Radians Per Second Converter

Instant conversion for 850 RPM to rad/s (89.011792 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result89.011792 rad/s
Radians per Second (rad/s)
89.011792
Degrees per Second (°/s)
5,100 °/s
Hertz (Hz)
14.166667 Hz
Revolutions per Second (RPS)
14.166667 rev/s
Revolutions per Hour (RPH)
51,000 rev/hr
Revolutions per Day
1,224,000 rev/day
Radians per Minute (rad/min)
5,340.7075 rad/min
Milliradians per Second (mrad/s)
89,011.792 mrad/s
Period (seconds per rev)
0.070588 s/rev
Exact Formula
850 × π/30 = 89.011792 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):89.011792 rad/s
Rounded (0.10472):89.012000 rad/s
Angular Error / Hour:42.93° / hr

Worked Conversion: 850 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 850 × (π / 30) = 89.011792 rad/s

Exact fraction: 850π/30 rad/s · Reciprocal: 89.012 rad/s × (30/π) = 850 RPM

Angular Velocity
89.011792 rad/s
Frequency
14.1667 Hz
Degrees / Second
5,100 °/s
Period per Rev
0.0706 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 89.012 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

850 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

850 RPM = 85π/3 rad/s ≈ 89.011792 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 88.995 rad/s instead of the exact 89.0118 rad/s — an error of 0.01679 rad/s.

What this speed looks like in practice

At 850 RPM a shaft turns about 1.13× as fast as a car engine at idle. A washing machine spin cycle turns about 1.41× faster.

Revolutions over time

That is 51,000 revolutions per hour and 1,224,000 per day. A quarter turn (90°) takes 17.6 ms, and the shaft sweeps 5.1° every millisecond.

Rim speed and centripetal load at ω = 89.0118 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.8901 m/s · 3.204 km/h79.23 m/s² · 8.079 g
5 cm10 cm4.451 m/s · 16.02 km/h396.2 m/s² · 40.4 g
10 cm20 cm8.901 m/s · 32.04 km/h792.3 m/s² · 80.79 g
25 cm50 cm22.25 m/s · 80.11 km/h1,981 m/s² · 202 g
50 cm1 m44.51 m/s · 160.2 km/h3,962 m/s² · 404 g
1 m2 m89.01 m/s · 320.4 km/h7,923 m/s² · 807.9 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 850 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
214.17 HzReachable with a VFD
428.33 HzReachable with a VFD
642.5 HzReachable with a VFD
856.67 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1283.3 RPM · 29.67 rad/s×3
5:1170 RPM · 17.8 rad/s×5
10:185 RPM · 8.901 rad/s×10
30:128.33 RPM · 2.967 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)3.962 J
0.01 kg·m² (bench-grinder wheel)39.62 J
0.1 kg·m² (car flywheel)396.2 J
1 kg·m² (industrial flywheel)3.962 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions