4,500 RPM to Radians Per Second Converter
Instant conversion for 4,500 RPM to rad/s (471.238898 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 471.2389
- Degrees per Second (°/s)
- 27,000 °/s
- Hertz (Hz)
- 75 Hz
- Revolutions per Second (RPS)
- 75 rev/s
- Revolutions per Hour (RPH)
- 270,000 rev/hr
- Revolutions per Day
- 6,480,000 rev/day
- Radians per Minute (rad/min)
- 28,274.334 rad/min
- Milliradians per Second (mrad/s)
- 471,238.9 mrad/s
- Period (seconds per rev)
- 0.013333 s/rev
- Exact Formula
- 4500 × π/30 = 471.2389 rad/s
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 4,500 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 4500 × (π / 30) = 471.238898 rad/s
Exact fraction: 4500π/30 rad/s · Reciprocal: 471.24 rad/s × (30/π) = 4,500 RPM
Reverse Conversion: 471.24 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
4,500 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
4,500 RPM = 150π rad/s ≈ 471.238898 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 471.15 rad/s instead of the exact 471.2389 rad/s — an error of 0.0889 rad/s.
What this speed looks like in practice
At 4,500 RPM a shaft turns about 2.5× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.2× faster.
Revolutions over time
That is 270,000 revolutions per hour and 6,480,000 per day. A quarter turn (90°) takes 3.33 ms, and the shaft sweeps 27° every millisecond.
Rim speed and centripetal load at ω = 471.2389 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 4.712 m/s · 16.96 km/h | 2,221 m/s² · 226.4 g |
| 5 cm | 10 cm | 23.56 m/s · 84.82 km/h | 11,100 m/s² · 1,132 g |
| 10 cm | 20 cm | 47.12 m/s · 169.6 km/h | 22,210 m/s² · 2,264 g |
| 25 cm | 50 cm | 117.8 m/s · 424.1 km/h | 55,520 m/s² · 5,661 g |
| 50 cm | 1 m | 235.6 m/s · 848.2 km/h | 111,000 m/s² · 11,320 g |
| 1 m | 2 m | 471.2 m/s · 1,696 km/h | 222,100 m/s² · 22,640 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 4,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 75 Hz | Reachable with a VFD |
| 4 | 150 Hz | Above typical VFD range |
| 6 | 225 Hz | Above typical VFD range |
| 8 | 300 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,500 RPM · 157.1 rad/s | ×3 |
| 5:1 | 900 RPM · 94.25 rad/s | ×5 |
| 10:1 | 450 RPM · 47.12 rad/s | ×10 |
| 30:1 | 150 RPM · 15.71 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 111 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.11 kJ |
| 0.1 kg·m² (car flywheel) | 11.1 kJ |
| 1 kg·m² (industrial flywheel) | 111 kJ |
Multiples of this speed
- 0.5× = 2,250 RPM235.6194 rad/s
- 2× = 9,000 RPM942.4778 rad/s
- 5× = 22,500 RPM2,356.1945 rad/s
- 10× = 45,000 RPM4,712.389 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 4,500 RPM to radians per second, multiply 4500 by π and divide by 30: 4500 × (π / 30) = 471.238898 rad/s (approx. 471.24 rad/s).
4,500 RPM equals 75.0000 Hz (revolutions per second), calculated by dividing 4500 by 60 seconds.
To convert 471.24 rad/s back to RPM, multiply by 30 and divide by π: 471.24 × (30 / π) ≈ 4,500 RPM.
At 4,500 RPM, one full 360° revolution takes 0.0133 seconds (13.33 ms).
A 4-pole induction motor has a synchronous speed of 4,500 RPM at 150 Hz (f = RPM × poles / 120 = 4500 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 471.238898 rad/s × 0.1 m = 47.1239 m/s (169.646 km/h). The centripetal acceleration at the rim is ω²·r = 22206.6099 m/s².