24 Rad/s to RPM Converter
Instant conversion for 24 rad/s to RPM (229.1831 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 229.18312
- Degrees per Second (°/s)
- 1,375.0987 °/s
- Hertz (Hz)
- 3.819719 Hz
- Revolutions per Second (RPS)
- 3.819719 rev/s
- Revolutions per Hour (RPH)
- 13,750.987 rev/hr
- Revolutions per Day
- 330,023.69 rev/day
- Radians per Minute (rad/min)
- 1,440 rad/min
- Milliradians per Second (mrad/s)
- 24,000 mrad/s
- Period (seconds per rev)
- 0.261799 s/rev
- Exact Formula
- 24 × 30/π = 229.18312 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 24 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 24 × (30 / π) = 229.1831 RPM
Exact fraction: (24 × 30)/π RPM · Reciprocal: 229.18 RPM × (π/30) = 24 rad/s
Forward Conversion: 250 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
24 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
24 rad/s = 720/π RPM ≈ 229.183118 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 229.2 RPM instead of the exact 229.1831 RPM — an error of 0.01688 RPM.
What this speed looks like in practice
At 229.1831 RPM a shaft turns about 1.15× as fast as a ceiling fan on high. A car engine at idle turns about 3.27× faster.
Revolutions over time
That is 13,751 revolutions per hour and 330,020 per day. A quarter turn (90°) takes 65.4 ms, and the shaft sweeps 1.375° every millisecond.
Rim speed and centripetal load at ω = 24 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.24 m/s · 0.864 km/h | 5.76 m/s² · 0.5874 g |
| 5 cm | 10 cm | 1.2 m/s · 4.32 km/h | 28.8 m/s² · 2.937 g |
| 10 cm | 20 cm | 2.4 m/s · 8.64 km/h | 57.6 m/s² · 5.874 g |
| 25 cm | 50 cm | 6 m/s · 21.6 km/h | 144 m/s² · 14.68 g |
| 50 cm | 1 m | 12 m/s · 43.2 km/h | 288 m/s² · 29.37 g |
| 1 m | 2 m | 24 m/s · 86.4 km/h | 576 m/s² · 58.74 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 229.18 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 3.82 Hz | Below typical VFD range — use a gearbox |
| 4 | 7.639 Hz | Reachable with a VFD |
| 6 | 11.46 Hz | Reachable with a VFD |
| 8 | 15.28 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 76.39 RPM · 8 rad/s | ×3 |
| 5:1 | 45.84 RPM · 4.8 rad/s | ×5 |
| 10:1 | 22.92 RPM · 2.4 rad/s | ×10 |
| 30:1 | 7.639 RPM · 0.8 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.288 J |
| 0.01 kg·m² (bench-grinder wheel) | 2.88 J |
| 0.1 kg·m² (car flywheel) | 28.8 J |
| 1 kg·m² (industrial flywheel) | 288 J |
Multiples of this speed
- 0.5× = 12 rad/s114.5916 RPM
- 2× = 48 rad/s458.3662 RPM
- 5× = 120 rad/s1,145.9156 RPM
- 10× = 240 rad/s2,291.8312 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 24 radians per second to RPM, multiply 24 by 30 and divide by π: 24 × (30 / π) = 229.1831 RPM (approx. 229.18 RPM).
24 rad/s equals 3.8197 Hz (revolutions per second), calculated by dividing 24 by 2π (approx. 6.283185).
To convert 229.18 RPM back to radians per second, multiply by π and divide by 30: 229.18 × (π / 30) ≈ 24 rad/s.
At 24 rad/s, one full 360° revolution takes 0.2618 seconds (261.80 ms).
24 rad/s is 229.1831 RPM, which a 4-pole induction motor reaches synchronously at 7.6394 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 24 rad/s × 0.1 m = 2.4 m/s (8.64 km/h), with a centripetal acceleration of ω²·r = 57.6 m/s².