3 Rad/s to RPM Converter
Instant conversion for 3 rad/s to RPM (28.6479 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 28.64789
- Degrees per Second (°/s)
- 171.88734 °/s
- Hertz (Hz)
- 0.477465 Hz
- Revolutions per Second (RPS)
- 0.477465 rev/s
- Revolutions per Hour (RPH)
- 1,718.8734 rev/hr
- Revolutions per Day
- 41,252.961 rev/day
- Radians per Minute (rad/min)
- 180 rad/min
- Milliradians per Second (mrad/s)
- 3,000 mrad/s
- Period (seconds per rev)
- 2.094395 s/rev
- Exact Formula
- 3 × 30/π = 28.64789 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 3 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 3 × (30 / π) = 28.6479 RPM
Exact fraction: (3 × 30)/π RPM · Reciprocal: 28.648 RPM × (π/30) = 3 rad/s
Forward Conversion: 29 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
3 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
3 rad/s = 90/π RPM ≈ 28.64789 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 28.65 RPM instead of the exact 28.6479 RPM — an error of 0.00211 RPM.
What this speed looks like in practice
At 28.6479 RPM a shaft turns about 1.91× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.16× faster.
Revolutions over time
That is 1,718.9 revolutions per hour and 41,253 per day. A quarter turn (90°) takes 524 ms, and the shaft sweeps 0.1719° every millisecond.
Rim speed and centripetal load at ω = 3 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03 m/s · 0.108 km/h | 0.09 m/s² · 0.009177 g |
| 5 cm | 10 cm | 0.15 m/s · 0.54 km/h | 0.45 m/s² · 0.04589 g |
| 10 cm | 20 cm | 0.3 m/s · 1.08 km/h | 0.9 m/s² · 0.09177 g |
| 25 cm | 50 cm | 0.75 m/s · 2.7 km/h | 2.25 m/s² · 0.2294 g |
| 50 cm | 1 m | 1.5 m/s · 5.4 km/h | 4.5 m/s² · 0.4589 g |
| 1 m | 2 m | 3 m/s · 10.8 km/h | 9 m/s² · 0.9177 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 28.65 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.4775 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.9549 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.432 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.91 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 9.549 RPM · 1 rad/s | ×3 |
| 5:1 | 5.73 RPM · 0.6 rad/s | ×5 |
| 10:1 | 2.865 RPM · 0.3 rad/s | ×10 |
| 30:1 | 0.9549 RPM · 0.1 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0045 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.045 J |
| 0.1 kg·m² (car flywheel) | 0.45 J |
| 1 kg·m² (industrial flywheel) | 4.5 J |
Multiples of this speed
- 0.5× = 1.5 rad/s14.3239 RPM
- 2× = 6 rad/s57.2958 RPM
- 5× = 15 rad/s143.2394 RPM
- 10× = 30 rad/s286.4789 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 3 radians per second to RPM, multiply 3 by 30 and divide by π: 3 × (30 / π) = 28.6479 RPM (approx. 28.648 RPM).
3 rad/s equals 0.4775 Hz (revolutions per second), calculated by dividing 3 by 2π (approx. 6.283185).
To convert 28.648 RPM back to radians per second, multiply by π and divide by 30: 28.648 × (π / 30) ≈ 3 rad/s.
At 3 rad/s, one full 360° revolution takes 2.0944 seconds (2094.40 ms).
3 rad/s is 28.6479 RPM, which a 4-pole induction motor reaches synchronously at 0.9549 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 3 rad/s × 0.1 m = 0.3 m/s (1.08 km/h), with a centripetal acceleration of ω²·r = 0.9 m/s².