RPM to Radians Per SecondRPM to rad/s

2 Rad/s to RPM Converter

Instant conversion for 2 rad/s to RPM (19.0986 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result19.098593 RPM
RPM
19.098593
Degrees per Second (°/s)
114.59156 °/s
Hertz (Hz)
0.31831 Hz
Revolutions per Second (RPS)
0.31831 rev/s
Revolutions per Hour (RPH)
1,145.9156 rev/hr
Revolutions per Day
27,501.974 rev/day
Radians per Minute (rad/min)
120 rad/min
Milliradians per Second (mrad/s)
2,000 mrad/s
Period (seconds per rev)
3.141593 s/rev
Exact Formula
2 × 30/π = 19.098593 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):2.000000 rad/s
Rounded (0.10472):2.000005 rad/s
Angular Error / Hour:0.96° / hr

Worked Conversion: 2 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 2 × (30 / π) = 19.0986 RPM

Exact fraction: (2 × 30)/π RPM · Reciprocal: 19.099 RPM × (π/30) = 2 rad/s

Rotational Speed
19.0986 RPM
Frequency
0.3183 Hz
Degrees / Second
114.59 °/s
Period per Rev
3.1416 s
Engineering Context: At 2 rad/s (slow rotational speed (19.099 RPM)), At 2 rad/s, the shaft rotates at approximately 19.099 RPM with a period of 3.14 seconds per revolution, typical of slow tracking actuators.

Forward Conversion: 19 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 19 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

2 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

2 rad/s = 60/π RPM ≈ 19.098593 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 19.1 RPM instead of the exact 19.0986 RPM — an error of 0.001407 RPM.

What this speed looks like in practice

At 19.0986 RPM a shaft turns about 1.27× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.75× faster.

Revolutions over time

That is 1,145.9 revolutions per hour and 27,502 per day. A quarter turn (90°) takes 785 ms, and the shaft sweeps 0.1146° every millisecond.

Rim speed and centripetal load at ω = 2 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.02 m/s · 0.072 km/h0.04 m/s² · 0.004079 g
5 cm10 cm0.1 m/s · 0.36 km/h0.2 m/s² · 0.02039 g
10 cm20 cm0.2 m/s · 0.72 km/h0.4 m/s² · 0.04079 g
25 cm50 cm0.5 m/s · 1.8 km/h1 m/s² · 0.102 g
50 cm1 m1 m/s · 3.6 km/h2 m/s² · 0.2039 g
1 m2 m2 m/s · 7.2 km/h4 m/s² · 0.4079 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 19.1 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.3183 HzBelow typical VFD range — use a gearbox
40.6366 HzBelow typical VFD range — use a gearbox
60.9549 HzBelow typical VFD range — use a gearbox
81.273 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:16.366 RPM · 0.6667 rad/s×3
5:13.82 RPM · 0.4 rad/s×5
10:11.91 RPM · 0.2 rad/s×10
30:10.6366 RPM · 0.06667 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.002 J
0.01 kg·m² (bench-grinder wheel)0.02 J
0.1 kg·m² (car flywheel)0.2 J
1 kg·m² (industrial flywheel)2 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions